7050-00-418-4416

5310-01-202-1630 5310012021630 012021630 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

8415-15-202-1630 8415152021630 152021630 is trousers primarily designed for protection at mean monthly temperatures of plus 14 degrees fahrenheit (minus 10 degrees celsius) to plus 68 degrees fahrenheit (plus 20 degrees celsius).

9390-00-202-1630 9390002021630 002021630

1680-14-202-1630 1680142021630 142021630 CHAPE SUPERIEURE EQ

5340-33-202-1630 5340332021630 332021630 is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.