7430-00-932-9401

www.nsnlookup.com /cage International Business Machines Corp (CAGE Code 0B4D7) 2 | DAC: 4 17 Feb 1967 7430-00-932-9401
www.nsnlookup.com /cage International Business Machines Corp (CAGE Code 81891) 9 | DAC: 5 17 Feb 1967 7430-00-932-9401

2 | DAC: 5 17 Feb 1967 7430-00-932-9400 Piston 1123574RNCC: 3 | RNVC: 2 | DAC: 4 17 Feb 1967 7430-00-932-9401

9 | DAC: 5 17 Feb 1967 7430-00-932-9400 Piston 1123574RNCC: 5 | RNVC: 9 | DAC: 5 17 Feb 1967 7430-00-932-9401

2590-13-112-3576 2590131123576 131123576 HOLDER,BACKREST

5310-01-112-3576 5310011123576 011123576 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.