8010-00-479-2141

6 19 Nov 1969 8010-00-479-2160 Ceramic Clear Glaze 1618RNCC: 3 | RNVC: 2 | DAC: 6 2 Feb 1970 8010-00-479-2141

5331-01-647-0772 5331016470772 016470772 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

5331-01-540-0879 5331015400879 015400879 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

MTV TM-9-2320-366-20-1 Unit Maintenance Manual - Volume 1 for M1083 Series Medium Tactical Vehicles. Page 1480 of 1824.

5310-01-045-8408 5310010458408 010458408 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.