8135-00-001-6643

3040-14-378-9151 3040143789151 143789151 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

-7793 Shipping And Storage Container Cushion 170057PC5RNCC: 3 | RNVC: 1 | DAC: 1 26 Jul 1972 8135-00-001-6643
Shipping And Storage Container Cushion 713985PC1-2RNCC: 3 | RNVC: 2 | DAC: 1 1 Jan 1963 8140-00-093-1259

5975-14-420-7508 5975144207508 144207508 is a cylindrical item into which a wire or cable is inserted. it is inscribed for identification, to indicate connections or routing of electrical cables and the like. for unmarked items made of insulation material, see insulation sleeving, electrical. for items secured by crimping, slot and tongue, or other similar methods of fastening, see band, marker.

4030-12-323-9856 4030123239856 123239856 is an anchor which may be any one of several designs, such as a ribbed cone, an assembly of expanding blade or plates, or a helical balde or spring. the item must have either an integral driving rod or accommodations for affixing a driving rod which may not be included. it may include a cable assembly which facilitates installation and is an integral part of the item. does not include guy wire(s) or rope(s). excludes post, screw metal.

5320-01-392-0719 5320013920719 013920719 is a metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.