Premium Information is available for this item - Upgrade for $1 a day
9390-00-031-3503
Nonmetallic Channel
9390000313503 000313503 4820182-960
A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL. View more Nonmetallic Channel
August 2023
5
Marketplace 9390-00-031-3503
Request a Quotation from participating marketplace vendors
Restrictions 9390-00-031-3503
9390-00-031-3503 is a Nonmetallic Channel that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
End Users 9390-00-031-3503
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
Approved Sources 9390-00-031-3503
- Part Number
- Manufacturer
- Status
- 4820182-960
- Manufacturer
- 81039 - Whippany Actuation Systems, Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 9390-00-031-3503
- Characteristic
- Specifications
- FIIG
- Specifications
- A547C0
- Cross-Sectional Shape Style [AAGR]
- Open Channel With Round Base
- Environmental Protection [ADZC]
- Warp/Twist
- First Slot/Groove Depth [AJGU]
- 0.160 Inches Nominal
- First Slot/Groove Width [AJHE]
- 0.030 Inches Nominal
- Material [MATT]
- Rubber
- Minimum Tensile Strength [AASH]
- 1500 Pounds Per Square Inch
- Nonmetallic Hardness Rating [AASF]
- 35.0 Minimum Shore Durometer A And 55.0 Maximum Shore Durometer A
- Outside Radius [AJGW]
- 0.060 Inches Nominal
- Left Side Flange Thickness [ADXL]
- 0.030 Inches Nominal
- Left-Side Flange Tip Style [BHQU]
- Left Square End
- Length [ABRY]
- 9.600 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-R-7362, Type 2 Mil Spec Single Material Response
- Right Side Flange Thickness [ADXM]
- 0.030 Inches Nominal
- Right-Side Flange Tip Style [CZLZ]
- Right Square End
- Overall Height [ABKW]
- 0.220 Inches Nominal
DLA Procurement Analysis 9390-00-031-3503
Management Data 9390-00-031-3503
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JY
- MISCELLANEOUS AIRCRAFT ACCESSORIES AND SYSTEMS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9390-00-031-3503
Freight Information 9390-00-031-3503
9390-00-031-3503 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 156950. A Sub NMFC of X. It has a NMFC Description of PLASTIC/RUBR MOULDINGS CHANNELS ETC. 9390-00-031-3503 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 77775 which rates the freight between FCL and LCL. 9390-00-031-3503 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 772 for ocean manifesting and military sealift. 9390-00-031-3503 is not classified as a special type of cargo when transported by water. 9390-00-031-3503 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9390-00-031-3503
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 9390-00-031-3503 1 Records
Contracting Technical Data File (CTDF) 9390-00-031-3503 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: