Premium Information is available for this item - Upgrade for $1 a day
9390-00-246-3789
Nonmetallic Channel
9390002463789 002463789 302108 8636210
A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL. View more Nonmetallic Channel
May 2023
9
Marketplace 9390-00-246-3789
Request a Quotation from participating marketplace vendors
Related Documents 9390-00-246-3789 5+ Documents (More...)
Restrictions 9390-00-246-3789
9390-00-246-3789 is a Nonmetallic Channel that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
End Users 9390-00-246-3789
- US Army (A920)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A186
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
Approved Sources 9390-00-246-3789
- Part Number
- Manufacturer
- Status
- 8636210
- Manufacturer
- 19200 - Combat Capabilities Development (Active)
- Primary Buy
- Primary Buy
- 302108
- 75183 - Johnson Rubber Co The (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 9390-00-246-3789
- Characteristic
- Specifications
- FIIG
- Specifications
- A547C0
- Cross-Sectional Shape Style [AAGR]
- Open Channel With Round Base
- Environmental Protection [ADZC]
- Crack And Low Temperature And High Temperature
- Material Document And Classification [MDCL]
- Mil-R-6855,Class 3,Grade 30 Mil Spec Single Material Response
- Material [MATT]
- Rubber Synthetic
- Minimum Tensile Strength [AASH]
- 1000 Pounds Per Square Inch
- Nonmetallic Hardness Rating [AASF]
- 25.0 Minimum Shore Durometer A And 35.0 Maximum Shore Durometer A
- Left Side Flange Thickness [ADXL]
- 0.063 Inches Nominal
- Left Side Flange Top Outer Radius [ADYF]
- 0.047 Inches Nominal
- Left-Side Flange Tip Style [BHQU]
- Left W/ Outside Radius
- Right Side Flange Thickness [ADXM]
- 0.063 Inches Nominal
- Right Side Flange Top Outer Radius [ADYJ]
- 0.047 Inches Nominal
- Right-Side Flange Tip Style [CZLZ]
- Right W/ Outside Radius
- Overall Height [ABKW]
- 0.406 Inches Nominal
- Temp Rating [ABJH]
- -55.0 Deg Celsius And 100.0 Deg Celsius
DLA Procurement Analysis 9390-00-246-3789
Management Data 9390-00-246-3789
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 9390-00-246-3789
Freight Information 9390-00-246-3789
9390-00-246-3789 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 156600. A Sub NMFC of Z. It has a NMFC Description of PLASTIC/RUBBER ARTICLE VIZ:. 9390-00-246-3789 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 77670 which rates the freight between FCL and LCL. 9390-00-246-3789 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 846 for ocean manifesting and military sealift. 9390-00-246-3789 is not classified as a special type of cargo when transported by water. 9390-00-246-3789 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9390-00-246-3789 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: