Premium Information is available for this item - Upgrade for $1 a day
9390-01-049-4615
Nonmetallic Special Shaped Section
9390010494615 010494615 BAC1521-516
A structural shape fabricated from nonmetallic material(s) having a peculiar preformed cross-sectional form. It may have a reinforcing agent(s) and backing. Excludes SEAL, NONMETALLIC SPECIAL SHAPED SECTION. View more Nonmetallic Special Shaped Section
May 2023
9
Marketplace 9390-01-049-4615
Request a Quotation from participating marketplace vendors
Restrictions 9390-01-049-4615
9390-01-049-4615 is a Nonmetallic Special Shaped Section that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
End Users 9390-01-049-4615
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9390-01-049-4615
- Part Number
- Manufacturer
- Status
- BAC1521-516
- Manufacturer
- 17765 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- BAC1521-516
- 81205 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9390-01-049-4615
- Characteristic
- Specifications
- FIIG
- Specifications
- A547D0
- Base Flange Thickness [AJGP]
- 0.040 Inches Nominal
- Cross-Sectional Shape Style [AAGR]
- Round, Hollow Core
- Environmental Protection [ADZC]
- Fuel Resistant And Low Temperature And Ozone Resistant And Weather Resistant And Oil Resistant
- First Tip Radius [AJJB]
- 0.035 Inches Nominal
- Material [MATT]
- Rubber
- Minimum Tensile Strength [AASH]
- 900 Pounds Per Square Inch
- Nonmetallic Hardness Rating [AASF]
- 35.0 Minimum Shore Durometer A And 45.0 Maximum Shore Durometer A
- Inside Radius [AEJJ]
- 0.060 Inches Nominal
- Length [ABRY]
- 72.000 Inches Nominal
- Outside Radius [AJGW]
- 0.100 Inches Nominal
- Overall Width [ABMK]
- 0.910 Inches Nominal
- Specification/Standard Data [ZZZK]
- 81205-Bac 1521-516 Professional/Industrial Association Standard
DLA Procurement Analysis 9390-01-049-4615
Management Data 9390-01-049-4615
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Defense Logistics Agency (DS)
- LG
- Subscribe
- LG
- Oct 2021
- Defense Logistics Agency (DS)
- LG
- Subscribe
- LG
- Oct 2020
- Defense Logistics Agency (DS)
- LG
- Subscribe
- LG
- Oct 2019
- Department of the Air Force (DF)
- LG
- Subscribe
- LG
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Air Force (DF)
- F
- K
- U/I Contains 6 Ft
- 00000000006FT
- K
- Defense Logistics Agency (DS)
- I
- K
- U/I Contains 6 Ft
- 00000000006FT
- K
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 9390-01-049-4615
Freight Information 9390-01-049-4615
9390-01-049-4615 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 156600. A Sub NMFC of Z. It has a NMFC Description of PLASTIC/RUBBER ARTICLE VIZ:. 9390-01-049-4615 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 77670 which rates the freight between FCL and LCL. 9390-01-049-4615 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 846 for ocean manifesting and military sealift. 9390-01-049-4615 is not classified as a special type of cargo when transported by water. 9390-01-049-4615 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 9390-01-049-4615 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: