Premium Information is available for this item - Upgrade for $1 a day
9510-00-075-9623
Metal Bar
9510000759623 000759623 AMS-QQ-S-763 MS14411C103 QQ-S-763
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
November 2023
11
Marketplace 9510-00-075-9623
Request a Quotation from participating marketplace vendors
Related Documents 9510-00-075-9623 5+ Documents (More...)
AMS-QQ-S-763 BAR,METAL 4 EA NS Request Quotation Subscribe to View Vendor Details...
WIRE,NONELECTRICAL 36 EA NS Request https/ AMS2806 QQ-S-763 A AMS-QQ-S-763 WIRE,NONELECTRICAL 36
QQ-S-763 BAR,METAL 9 EA NS Request Quotation AMS-QQ-S-763 BAR,METAL 36 EA NS Request Quotation QQ-S763
WIRE,NONELECTRICAL 36 EA NS Request https/ AMS2806 QQ-S-763 A AMS-QQ-S-763 WIRE,NONELECTRICAL 36 https
AMS-QQ-S-763 BAR,METAL 4 EA NS Request Quotation Subscribe to View Vendor Details...
BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763AMS-QQ-S- AMS-QQ-S-763 9 FT NS Request Quotation AMS-QQ-S
,METAL 9 FT NS Request Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763 AMS-QQ-S-
AMS-QQ-S-763 9 FT NS Request Quotation AMS-QQ-S-763 ANGLE,STRUCTURAL 36 FT NS Request Quotation AMS-QQ-S
,METAL 9 FT NS Request Quotation QQ-S763 BAR,METAL 315 FT NS Request Quotation AMS-QQ-S-763 AMS-QQ-S-
AMS-QQ-S-763 9 FT NS Request Quotation AMS-QQ-S-763 ANGLE,STRUCTURAL 36 FT NS Request Quotation AMS-QQ-S
Restrictions 9510-00-075-9623
9510-00-075-9623 is a Metal Bar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9510-00-075-9623
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9510-00-075-9623
- US Army (A920)
- Effective Date:
- 1 Mar 2015
- Supplementary Receivers:
- ANCT
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- NASA (G900)
- Effective Date:
- 1 Apr 1991
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2014
- Supplementary Collaborators:
- GG
- Poland (WP01)
- Effective Date:
- 1 Jun 2006
Approved Sources 9510-00-075-9623
- Part Number
- Manufacturer
- Status
- AMS-QQ-S-763
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- MS14411C103
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-S-763
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-S-763
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9510-00-075-9623
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 2.000 Inches Nominal
- Fabrication Method [AARN]
- Cold Finish
- Heat Treatment [HEAT]
- Annealed
- Material [MATT]
- Steel, Ams-Qq-S-763, Class 304
- Nondefinitive Spec/Std Data [ZZZT]
- 304 Class And A Condition
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Weight Per Unit Measure [BRFD]
- 10.680 Pounds Per Linear Foot
Weapon Systems (WSDC) 9510-00-075-9623
DLA Procurement Analysis 9510-00-075-9623
- Last Stock Position:
- 80 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9510-00-075-9623
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- CC
- Other Aircraft Categories
Multi-Application Aviation Spares
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9510-00-075-9623
Freight Information 9510-00-075-9623
9510-00-075-9623 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-00-075-9623 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-00-075-9623 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9510-00-075-9623 is not classified as a special type of cargo when transported by water. 9510-00-075-9623 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-00-075-9623
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9510-00-075-9623 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: