Premium Information is available for this item - Upgrade for $1 a day
9510-00-090-9981
Metal Bar
9510000909981 000909981 MIL-DTL-1222 MILS1222 MILS1222L1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
9
Marketplace 9510-00-090-9981
Request a Quotation from participating marketplace vendors
Related Documents 9510-00-090-9981 5+ Documents (More...)
MILS1222 ,GRADEB16 SZ 1 1/4 MIL-DTL-1222 MIL-DTL-1222L1 ASTM-A193,GRADEB16 SZ 1 1/4L1 MILS1222 MILS1222L1
MILS1222 ,GRADEB16 SZ 1 1/4 MIL-DTL-1222 MIL-DTL-1222L1 ASTM-A193,GRADEB16 SZ 1 1/4L1 MILS1222 MILS1222L1
/fsg-95/fsc-9510/ca
A metallic GRB16 5/8 INCH ROUND MIL-DTL-1222 ASTM-A193 GRB16 5/8 INCH ROUNDL1 MILS1222 MILS1222L1 A
MILS1222 ,GRADEB16 SZ 1 1/4 MIL-DTL-1222 MIL-DTL-1222L1 ASTM-A193,GRADEB16 SZ 1 1/4L1 MILS1222 MILS1222L1
QQ-N- QQ-N-286 GR500 MIL-DTL-1222 -1222L1 1/2-13UNC-2A X 1 3/ 4, TYIL1 MIL-DTL-1222 QQ-N-286 GR500L1
-286 GR500 MIL-DTL-1222 -1222L1 1/2-13UNC-2A X 1 3/ 4, TYIL1 MIL-DTL-1222 QQ-N-286 GR500L1 ITEM 13 1/
QQ-N-286 GR500L1 -286 GR500 MIL-DTL-1222 -1222L1 QQ-N-286 GR500L1 -286 GR500 MIL-DTL-1222 -1222L1
QQ-N-286 GR500L1 -286 GR500 MIL-DTL-1222 -1222L1 QQ-N- QQ-N-286 GR500 MIL-DTL-1222 -1222L1 1/2-
QQ-N-286 GR500L1 -286 GR500 MIL-DTL-1222 -1222L1 QQ-N-286 GR500L1 -286 GR500 MIL-DTL-1222 -1222L1
QQ-N-286 GR500L1 -286 GR500 MIL-DTL-1222 -1222L1 QQ-N- QQ-N-286 GR500 MIL-DTL-1222 -1222L1 1/2-
Restrictions 9510-00-090-9981
9510-00-090-9981 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9510-00-090-9981
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9510-00-090-9981
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Collaborators:
- HX
- Supplementary Receivers:
- GG
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 9510-00-090-9981
- Part Number
- Manufacturer
- Status
- MIL-DTL-1222
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILS1222
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILS1222L1
- 03950 - Naval Inventory Control Point (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9510-00-090-9981
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 0.375 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Quality Control Iaw Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- Fabrication Method [AARN]
- Cold Finish And Hot Rolled
- Heat Treatment [HEAT]
- Quenched And Tempered
- Material [MATT]
- Steel, Mil-S-1222, Grade B16
- Nondefinitive Spec/Std Data [ZZZT]
- B16 Grade And 1 Type
- Length [ABRY]
- 8.000 Feet Minimum And 12.000 Feet Maximum
- Surface Condition [SFCD]
- Descaled Overall
DLA Procurement Analysis 9510-00-090-9981
Management Data 9510-00-090-9981
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9510-00-090-9981
Freight Information 9510-00-090-9981
9510-00-090-9981 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-00-090-9981 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 9510-00-090-9981 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-00-090-9981 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9510-00-090-9981 is not classified as a special type of cargo when transported by water. 9510-00-090-9981 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-00-090-9981
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 0.4" W x 0.4" L
- --
- --
- --
- Any Suitable Process
- 144.0" H x 0.4" W x 0.4" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement