Premium Information is available for this item - Upgrade for $1 a day
9510-00-126-1014
Metal Bar
9510001261014 001261014 ASTM-A322,GR G86200,3 INCH ROU MILS20166 MILS20166L1 ASTM-A322,GR G86200,3 INCH ROUL1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
9
Marketplace 9510-00-126-1014
Request a Quotation from participating marketplace vendors
Related Documents 9510-00-126-1014 5+ Documents (More...)
-1014Metal Bar9510001261014 001261014 ASTM-A322 ,GR G86200,3 INCH ROU MILS20166 MILS20166L1 ASTM-A322
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-830-8073 Metal Bar 9510008308073 008308073,MILS20166
-1014Metal Bar9510001261014 001261014 ASTM-A322 ,GR G86200,3 INCH ROU MILS20166 MILS20166L1 ASTM-A322
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-830-8073 Metal Bar 9510008308073 008308073,MILS20166
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-830-8073 Metal Bar 9510008308073 008308073,MILS20166
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-126-1014 Metal Bar 9510001261014 001261014 Account
DAC E MIL-S-22698 81349 - Military Specifications (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 4 MILS20166
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-126-1014 Metal Bar 9510001261014 001261014 Account
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-830-8073 Metal Bar 9510008308073 008308073,MILS20166
https//www.nsnlookup.com /fsg-95/fsc-9510/us 9510-00-126-1014 Metal Bar 9510001261014 001261014 Account
Restrictions 9510-00-126-1014
9510-00-126-1014 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9510-00-126-1014
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9510-00-126-1014
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9510-00-126-1014
- Part Number
- Manufacturer
- Status
- ASTM-A322,GR G86200,3 INCH ROU
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILS20166
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILS20166L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- ASTM-A322,GR G86200,3 INCH ROUL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 9510-00-126-1014
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 3.000 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Fabrication Method [AARN]
- Any Acceptable
- Heat Treatment [HEAT]
- As Fabricated
- Material Document And Classification [MDCL]
- Mil-S-20166, Grade Ht Mil Spec 1St Material Response
- Material [MATT]
- Steel Comp 8620
- Nondefinitive Spec/Std Data [ZZZT]
- Ht Grade And U Type
- Length [ABRY]
- 8.000 Feet Minimum And 12.000 Feet Maximum
- Surface Condition [SFCD]
- Ground Overall
Management Data 9510-00-126-1014
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9510-00-126-1014
Freight Information 9510-00-126-1014
9510-00-126-1014 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 104340. A Sub NMFC of X. It has a NMFC Description of BARS/RODS NOI I/S. 9510-00-126-1014 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 9510-00-126-1014 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 53760 which rates the freight between FCL and LCL. 9510-00-126-1014 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 572 for ocean manifesting and military sealift. 9510-00-126-1014 is not classified as a special type of cargo when transported by water. 9510-00-126-1014 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9510-00-126-1014
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 3.0" W x 3.0" L
- --
- --
- --
- Any Suitable Process
- 144.0" H x 3.0" W x 3.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- Open for inspection or use only
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement