Premium Information is available for this item - Upgrade for $1 a day
9520-00-277-4501
Structural Beam
9520002774501 002774501 ABS RULES MIL-S-22698
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
10
Marketplace 9520-00-277-4501
Request a Quotation from participating marketplace vendors
Related Documents 9520-00-277-4501 5+ Documents (More...)
//www.nsnlookup.com ABS RULES AMS 2807A MIL-S-22698 014309253 ABS RULES AMS 2807A MIL-S-22698 https 014309253
MIL-S-22698 014309253 ABS RULES AMS 2807A MIL-S-22698 https 014309253 ABS RULES AMS 2807A MIL-S-22698
ABS RULES AMS 2807A MIL-S-22698 014309253 ABS RULES AMS -22698 https//www.nsnlookup.com ABS RULES AMS
014309253 ABS RULES AMS 2807A MIL-S-22698 ABS RULES AMS 2807A MIL-S-22698ABS RULES AMS 2807A MIL-S-22698
2807A MIL-S-22698 https 014309253 ABS RULES AMS 2807A https//www.nsnlookup.com ABS RULES AMS 2807A MIL-S
-22698 https//www.nsnlookup.com ABS RULES AMS 2807A MIL-S-22698 ABS RULES AMS 2807A MIL-S-22698 https
ABS RULES AMS 2807A MIL-S-22698 014309253 ABS RULES AMS -22698 https//www.nsnlookup.com ABS RULES AMS
014309253 ABS RULES AMS 2807A MIL-S-22698 ABS RULES AMS 2807A MIL-S-22698ABS RULES AMS 2807A MIL-S-22698
-22698 https//www.nsnlookup.com ABS RULES AMS 2807A MIL-S-22698 ABS RULES AMS 2807A MIL-S-22698 https
014309253 ABS RULES AMS 2807A MIL-S-22698 014309253 ABS RULES MIL-S-22698 014309253 ABS RULES AMS 2807A
Restrictions 9520-00-277-4501
9520-00-277-4501 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9520-00-277-4501
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9520-00-277-4501
- US Army (A920)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A186
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHD
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9520-00-277-4501
- Part Number
- Manufacturer
- Status
- ABS RULES
- Manufacturer
- 0T3K3 - American Bureau Of Shipping (Active)
- Incomplete Reference
- Incomplete Reference
- MIL-S-22698
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9520-00-277-4501
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- H Shape
- Fabrication Method [AARN]
- Hot Rolled
- Fillet Radius Where Bottom Left Flange Joins Web Flange/Leg [BPXK]
- 0.400 Inches Nominal
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.400 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.400 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.400 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Identical W/First Tip
- Heat Treatment [HEAT]
- As Fabricated
- Material [MATT]
- Steel, Abs Rules, Grade A
- Nondefinitive Spec/Std Data [ZZZT]
- Grade A
- Left Side Bottom Flange Distance To Center Of Both Flanges [BPXF]
- 3.500 Inches Nominal
- Left Side Flange Height [ADXJ]
- 7.000 Inches Nominal
- Left Side Flange Thickness [ADXL]
- 0.562 Inches Nominal
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 3.500 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Left Bottom Inside Angle [CTBR]
- 90.0 Degrees Nominal
- Length [ABRY]
- 30.000 Feet Minimum And 40.000 Feet Maximum
- Right Side Bottom Flange Distance To Center Of Both Flanges [BPXH]
- 3.500 Inches Nominal
- Right Side Flange Height [ADXK]
- 7.000 Inches Nominal
- Right Side Flange Thickness [ADXM]
- 0.562 Inches Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 3.500 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Width [ABMK]
- 16.000 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 50.000 Pounds Per Linear Foot
- Web Flange Thickness [BPXN]
- 0.375 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9520-00-277-4501
Management Data 9520-00-277-4501
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9520-00-277-4501
Freight Information 9520-00-277-4501
9520-00-277-4501 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9520-00-277-4501 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9520-00-277-4501 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9520-00-277-4501 is not classified as a special type of cargo when transported by water. 9520-00-277-4501 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9520-00-277-4501
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9520-00-277-4501 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: