Premium Information is available for this item - Upgrade for $1 a day
9520-00-277-7305
Structural Beam
9520002777305 002777305 ABS RULES MIL-S-22698
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
May 2023
9
Marketplace 9520-00-277-7305
Request a Quotation from participating marketplace vendors
Related Documents 9520-00-277-7305 5+ Documents (More...)
MIL-S-22698 ABS RULES 153-3372 Metal Plate 9515001533372 001533372 MIL-S-22698 0.3750 THK 407-5755483
ABS RULES Upgrade your Account Upgrade 9515-00-224-3087Metal Plate9515002243087 002243087 ABS RULES MIL-S
1/4IN THK MIL-S-22698 3/8 ,2-3/8 X 3-7/8 ABS RULESMIL-S-22698 A SPACER,PLATE 45 SPACER,PLATE 45
SPACER,PLATE 45 SPACER,PLATE 45 215-6938324 ITEM 4 MIL-S-22698,DH-36,CLU,1/4X8X8 A flat metal or
MIL-S-22698 SHEET,METAL 45 SH NS Request Quotation FedMall Updated Every 15 Minutes 9515-01-430-9253
AMS2807 PLATE,METAL 1357 PM NS Request Quotation MIL-S-22698 PLATE,METAL 45 PM NS Request Quotation
BEAM,STRUCTURAL 45 FT NS Request Quotation AMS 2807A MIL-S-22698,GRA,CLU,0.1875X96X33 A ferrous
AMS 2807A MIL-S-22698,GRA,CLU,0.1875X96X33 A ferrous or nonferrous product with cross-sectional MIL-S
DH-36GR U CLASS MIL-S-22698,DH- 36GR,U CLASS MIL-S-22698 1/2 PL 10-3/4 X1 MIL-S-22698 A 1/4IN THK
MIL-S-22698,GA- AH36 MIL-S-22698 A structural shape fabricated from a ferrous AMS 2807A MIL-S-22698,
Restrictions 9520-00-277-7305
9520-00-277-7305 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9520-00-277-7305
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9520-00-277-7305
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Supplementary Collaborators:
- GTHD
Approved Sources 9520-00-277-7305
- Part Number
- Manufacturer
- Status
- ABS RULES
- Manufacturer
- 0T3K3 - American Bureau Of Shipping (Active)
- Incomplete Reference
- Incomplete Reference
- MIL-S-22698
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9520-00-277-7305
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- H Shape
- Fabrication Method [AARN]
- Hot Rolled
- Fillet Radius Where Bottom Left Flange Joins Web Flange/Leg [BPXK]
- 0.400 Inches Nominal
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.400 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.400 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.400 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Fourth Tip Relationship To Preceding Tips [CNQN]
- Identical W/First Tip
- Heat Treatment [HEAT]
- As Fabricated
- Material [MATT]
- Steel, Abs Rules, Grade Ah36
- Nondefinitive Spec/Std Data [ZZZT]
- Grade Ah36
- Left Side Bottom Flange Distance To Center Of Both Flanges [BPXF]
- 3.750 Inches Nominal
- Left Side Flange Height [ADXJ]
- 7.500 Inches Nominal
- Left Side Flange Thickness [ADXL]
- 0.500 Inches Nominal
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 3.750 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Left Bottom Inside Angle [CTBR]
- 90.0 Degrees Nominal
- Length [ABRY]
- 30.000 Feet Minimum And 40.000 Feet Maximum
- Right Side Bottom Flange Distance To Center Of Both Flanges [BPXH]
- 3.750 Inches Nominal
- Right Side Flange Height [ADXK]
- 7.500 Inches Nominal
- Right Side Flange Thickness [ADXM]
- 0.500 Inches Nominal
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 3.750 Inches Nominal
- Right Top Inside Angle [CRZC]
- 90.0 Degrees Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Width [ABMK]
- 18.000 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 50.000 Pounds Per Linear Foot
- Web Flange Thickness [BPXN]
- 0.375 Inches Nominal
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
DLA Procurement Analysis 9520-00-277-7305
Management Data 9520-00-277-7305
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9520-00-277-7305
Freight Information 9520-00-277-7305
9520-00-277-7305 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9520-00-277-7305 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9520-00-277-7305 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9520-00-277-7305 is not classified as a special type of cargo when transported by water. 9520-00-277-7305 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9520-00-277-7305
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9520-00-277-7305 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: