Premium Information is available for this item - Upgrade for $1 a day
9525-00-249-7455
Nonelectrical Wire
9525002497455 002497455 QQB626 MS52003C003
A ferrous or nonferrous wire having a solid cross section that is square or rectangular with sharp or rounded corners or edges, or is round, half-round, hexagonal, or octagonal and whose diameter, width, or greatest distance between parallel faces is less than 3/8 inch or 10.0mm. The rectangular shape is limited to a thickness less than 3/32 inch or 2.5mm and a width of 1 1/4 inch or 30.0mm or less. For dimensions greater than above, see BAR, METAL. Excludes items having electrical resistivity or conductivity ratings. View more Nonelectrical Wire
November 2023
11
Marketplace 9525-00-249-7455
Request a Quotation from participating marketplace vendors
Related Documents 9525-00-249-7455 5+ Documents (More...)
for $1 a day Upgrade your Account Upgrade 9525-00-069-4897Nonelectrical Wire9525000694897 000694897 QQB626
for $1 a day Upgrade your Account Upgrade 9525-00-060-4997Nonelectrical Wire9525000604997 000604997 QQB626
https//www.nsnlookup.com /fsg-95/fsc-9535/us 9535-00-730-6917 Metal Strip 9535007306917 007306917,QQB626
https//www.nsnlookup.com /fsg-96/fsc-9640/us 9640-00-060-5028 Metal Round 9640000605028 000605028,QQB626
https//www.nsnlookup.com /fsg-95/fsc-9535/us 9535-00-730-6917 Metal Strip 9535007306917 007306917,QQB626
https//www.nsnlookup.com /fsg-96/fsc-9640/us 9640-00-060-5028 Metal Round 9640000605028 000605028,QQB626
https//www.nsnlookup.com /fsg-95/fsc-9535/us 9535-00-730-6917 Metal Strip 9535007306917 007306917,QQB626
https//www.nsnlookup.com /fsg-96/fsc-9640/us 9640-00-060-5028 Metal Round 9640000605028 000605028,QQB626
https//www.nsnlookup.com /fsg-95/fsc-9535/us 9535-00-730-6917 Metal Strip 9535007306917 007306917,QQB626
https//www.nsnlookup.com /fsg-96/fsc-9640/us 9640-00-060-5028 Metal Round 9640000605028 000605028,QQB626
Restrictions 9525-00-249-7455
9525-00-249-7455 is a Nonelectrical Wire that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9525-00-249-7455
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9525-00-249-7455
- US Army (A920)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A186
- Supplementary Receivers:
- CT
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- NASA (G150)
- Effective Date:
- 1 Apr 1991
- NASA (G190)
- Effective Date:
- 1 Apr 1991
- NASA (G880)
- Effective Date:
- 1 Apr 1991
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 9525-00-249-7455
- Part Number
- Manufacturer
- Status
- MS52003C003
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- QQB626
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 9525-00-249-7455
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Hexagon
- Cross-Sectional Width Across Flats [BMNZ]
- 0.250 Inches Nominal
- Heat Treatment [HEAT]
- Half Hard
- Material Document And Classification [MDCL]
- Qq-B-626, Alloy 360 Fed Spec Single Material Response
- Material [MATT]
- Copper Alloy 360
- Minimum Tensile Strength [CQBC]
- 57000 Pounds Per Square Inch
- Minimum Yield Strength [CQHQ]
- 25000 Pounds Per Square Inch
- Nondefinitive Spec/Std Data [ZZZT]
- 360 Composition And Rod Form And Half Hard Temper
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Weight Per Unit Measure [BRFD]
- 0.199 Pounds Per Linear Foot
DLA Procurement Analysis 9525-00-249-7455
- Last Stock Position:
- 14 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9525-00-249-7455
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 7
- Reviewed and determined non-essential
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 9525-00-249-7455
Freight Information 9525-00-249-7455
9525-00-249-7455 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 030310. A Sub NMFC of Z. It has a NMFC Description of CABLE OR WIRE. 9525-00-249-7455 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 15080 which rates the freight between FCL and LCL. 9525-00-249-7455 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9525-00-249-7455 is not classified as a special type of cargo when transported by water. 9525-00-249-7455 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9525-00-249-7455
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9525-00-249-7455 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: