Premium Information is available for this item - Upgrade for $1 a day
9525-01-013-3828
Nonelectrical Wire
9525010133828 010133828 ASTM B166 LO1002 P0010133828 PO0259NRP QQ-W-390
A ferrous or nonferrous wire having a solid cross section that is square or rectangular with sharp or rounded corners or edges, or is round, half-round, hexagonal, or octagonal and whose diameter, width, or greatest distance between parallel faces is less than 3/8 inch or 10.0mm. The rectangular shape is limited to a thickness less than 3/32 inch or 2.5mm and a width of 1 1/4 inch or 30.0mm or less. For dimensions greater than above, see BAR, METAL. Excludes items having electrical resistivity or conductivity ratings. View more Nonelectrical Wire
November 2023
12
Marketplace 9525-01-013-3828
Request a Quotation from participating marketplace vendors
Related Documents 9525-01-013-3828 5+ Documents (More...)
QQ-W-390 WIRE,NONELECTRICAL 9 CL NS Request Quotation QQ-W390 WIRE,NONELECTRICAL 2600 CL NS Request
QQ-W390 WIRE,NONELECTRICAL 2600 CL NS Request Quotation QQ-W-390 WIRE,NONELECTRICAL 9 CL NS Request
MS20995N40 NASM20995 N40 MS20995-40 AN995N40 QQ-W-390 https//www.nsnlookup.com ASTM B166 ASTM B166 https
MS20995N40 NASM20995 N40 MS20995-40 AN995N40 QQ-W-390 https//www.nsnlookup.com ASTM B166 ASTM B166 https
MS20995N40 NASM20995 N40 MS20995-40 AN995N40 QQ-W-390 https//www.nsnlookup.com ASTM B166 ASTM B166 https
N40 MS20995-40 AN995N40 QQ-W-390 https//www.nsnlookup.com ASTM B166 ASTM B166 https//www.nsnlookup.com
ASTM B166ASTM B166-11 MS20995N40 NASM20995 N40 MS20995-40 AN995N40 QQ-W-390 https//www.nsnlookup.com
https//www.nsnlookup.com ASTM B166 ASTM B166-11 MS20995N40 NASM20995 N40 MS20995-40 AN995N40 QQ-W
ASTM B166ASTM B166-11 MS20995N40 NASM20995 N40 MS20995-40 AN995N40 QQ-W-390 https//www.nsnlookup.com
https//www.nsnlookup.com ASTM B166 ASTM B166-11 MS20995N40 NASM20995 N40 MS20995-40 AN995N40 QQ-W
Restrictions 9525-01-013-3828
9525-01-013-3828 is a Nonelectrical Wire that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9525-01-013-3828
- US Coast Guard (C918)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- C003
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Supplementary Collaborators:
- GTHXHD
Approved Sources 9525-01-013-3828
- Part Number
- Manufacturer
- Status
- ASTM B166
- Manufacturer
- 81346 - American Society For Testing And (Active)
- Incomplete Reference
- Incomplete Reference
- LO1002
- 16236 - Dla Land And Maritime (Active)
- Secondary Buy
- Secondary Buy
- P0010133828
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- PO0259NRP
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-W-390
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9525-01-013-3828
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 0.062 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzy
- Departure From Cited Document [ZZZW]
- As Modified By Material Which Must Conform To Ships Parts Control Center Special Quality Control Provisions
- Heat Treatment [HEAT]
- Annealed
- Material [MATT]
- Nickel-Chromium-Iron Alloy, Astm B166, Inconel 600
- Minimum Tensile Strength [CQBC]
- 80000 Pounds Per Square Inch
- Nondefinitive Spec/Std Data [ZZZT]
- Uns N06600 And Condition Annealed
- Length [ABRY]
- 86.000 Feet Nominal
- Reference Number Differentiating Characteristics [ZZZY]
- Reference Number Differentiating Material Will Be In Accordance With Naval Inventory Control Point Activity Hx Quality Control. Manufacturing And Testing Specifications Available At The Dla Icp
- Special Features [FEAT]
- Item Must Comply With Requirements Of Defense Supply Center Columbus Production Standard No. Lo1002
- Weight Per Unit Measure [BRFD]
- 1.000 Pounds Per Piece
- Special Test Features [SPCL]
- Special Quality Control Testing
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 9525-01-013-3828
DLA Procurement Analysis 9525-01-013-3828
- Last Stock Position:
- 2257 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9525-01-013-3828
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9525-01-013-3828
Freight Information 9525-01-013-3828
9525-01-013-3828 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 139980. A Sub NMFC of X. It has a NMFC Description of NICKEL WIRE IN PKGS. 9525-01-013-3828 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 70330 which rates the freight between FCL and LCL. 9525-01-013-3828 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9525-01-013-3828 is not classified as a special type of cargo when transported by water. 9525-01-013-3828 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9525-01-013-3828
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 9525-01-013-3828 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: