Premium Information is available for this item - Upgrade for $1 a day
9530-00-097-0975
Metal Bar
9530000970975 000970975 MILC15726 MIL-C-15726C71500TEMP060 3 1/2 ROUND BAR SOFT TEMPER 3 1/2IN MILC15726L1 MIL-C-15726C71500TEMP060 3 1/2L1 MILC15726TEMPER 060 3 1/2INL1 ROUND BAR SOFT TEMPER 3 1/2INL1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
May 2023
10
Marketplace 9530-00-097-0975
Request a Quotation from participating marketplace vendors
Related Documents 9530-00-097-0975 5+ Documents (More...)
MILC15726 C71500 TEMP060 3INRD MIL-C-15726 COMPC71500 MIL-C-15726 COMPC71500L1 MILC15726L1MILC15726
https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-00-097-0975 Metal Bar 9530000970975 000970975,MILC15726
MILC15726 C71500 TEMP060 3INRD MIL-C-15726 COMPC71500 MIL-C-15726 COMPC71500L1 MILC15726L1MILC15726
https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-00-097-0975 Metal Bar 9530000970975 000970975,MILC15726
MILC15726 C71500 TEMP060 3INRD MIL-C-15726 COMPC71500 MIL-C-15726 COMPC71500L1 MILC15726L1 MILC15726
MILC15726 C71500 TEMP060 3INRD MIL-C-15726 COMPC71500 MIL-C-15726 COMPC71500L1 MILC15726L1MILC15726
MILC15726 C71500 TEMP060 3INRD MIL-C-15726 COMPC71500 MIL-C-15726 COMPC71500L1 MILC15726L1 MILC15726
MILC15726 C71500 TEMP060 3INRD MIL-C-15726 COMPC71500 MIL-C-15726 COMPC71500L1 MILC15726L1MILC15726
MILC15726 C71500 TEMP060 3INRD MIL-C-15726 COMPC71500 MIL-C-15726 COMPC71500L1 MILC15726L1 MILC15726
MILC15726 C71500 TEMP060 3INRD MIL-C-15726 COMPC71500 MIL-C-15726 COMPC71500L1 MILC15726L1MILC15726
Restrictions 9530-00-097-0975
9530-00-097-0975 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9530-00-097-0975
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9530-00-097-0975
- Part Number
- Manufacturer
- Status
- MILC15726
- Manufacturer
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-15726C71500TEMP060 3 1/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- ROUND BAR SOFT TEMPER 3 1/2IN
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILC15726L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MIL-C-15726C71500TEMP060 3 1/2L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- MILC15726TEMPER 060 3 1/2INL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- ROUND BAR SOFT TEMPER 3 1/2INL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 9530-00-097-0975
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 3.500 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Fabrication Method [AARN]
- Cold Rolled
- Heat Treatment [HEAT]
- Soft Temper
- Material [MATT]
- Copper Alloy 715
- Length [ABRY]
- 8.000 Feet Minimum And 12.000 Feet Maximum
- Material Document And Classification [MDCL]
- Mil-C-15726, Comp 70-30 Mil Spec 1St Material Response
DLA Procurement Analysis 9530-00-097-0975
Management Data 9530-00-097-0975
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9530-00-097-0975
Freight Information 9530-00-097-0975
9530-00-097-0975 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 030220. A Sub NMFC of X. It has a NMFC Description of BBC BARS/BILLETS R RODS DRAWN ETC. 9530-00-097-0975 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. 9530-00-097-0975 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 14750 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9530-00-097-0975 is not classified as a special type of cargo when transported by water. 9530-00-097-0975 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-00-097-0975
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 3.5" W x 3.5" L
- --
- --
- --
- Any Suitable Process
- 144.0" H x 3.5" W x 3.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special requirement – See specific instructions or drawings provided