Premium Information is available for this item - Upgrade for $1 a day
9530-00-107-8502
Metal Bar
9530001078502 001078502 QQC390 QQC390L1
A metallic product of ferrous or nonferrous material. It is produced as a solid section in straight lengths or short barlike forms of cored or solid cross section. It may be round, square, hexagon, oval, half-oval, or half-round shape whose width, diameter, or distance between parallel faces is 3/8 inch or 10.0mm or greater. Rectangular shape cross-sectional dimensions are limited to those established in Appendix C, FIIG A131. It is round to a maximum diameter of 24 inches or 610.0mm. For a rectangular shape less than 3/32 inch or 2.5mm thickness, see WIRE (1), NONELECTRICAL. View more Metal Bar
August 2023
7
Marketplace 9530-00-107-8502
Request a Quotation from participating marketplace vendors
Related Documents 9530-00-107-8502 5+ Documents (More...)
Account Upgrade 9530-00-097-0780Metal Bar9530000970780 000970780 QQC390 QQC390L1 A metallic product of
https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-00-107-8502 Metal Bar 9530001078502 001078502,QQC390
Account Upgrade 9530-00-097-0780Metal Bar9530000970780 000970780 QQC390 QQC390L1 A metallic product of
https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-00-107-8502 Metal Bar 9530001078502 001078502,QQC390
Account Upgrade 9530-00-097-0780Metal Bar9530000970780 000970780 QQC390 QQC390L1 A metallic product of
https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-00-107-8502 Metal Bar 9530001078502 001078502,QQC390
Account Upgrade 9530-00-097-0780Metal Bar9530000970780 000970780 QQC390 QQC390L1 A metallic product of
https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-00-107-8502 Metal Bar 9530001078502 001078502,QQC390
Account Upgrade 9530-00-097-0780Metal Bar9530000970780 000970780 QQC390 QQC390L1 A metallic product of
https//www.nsnlookup.com /fsg-95/fsc-9530/us 9530-00-107-8502 Metal Bar 9530001078502 001078502,QQC390
Restrictions 9530-00-107-8502
9530-00-107-8502 is a Metal Bar that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9530-00-107-8502
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9530-00-107-8502
- US Air Force (FGHD)
- Effective Date:
- 1 Apr 1991
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 9530-00-107-8502
- Part Number
- Manufacturer
- Status
- QQC390
- Manufacturer
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- QQC390L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 9530-00-107-8502
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Round
- Cross Section Outside Diameter [ADVL]
- 5.000 Inches Nominal
- Criticality Code Justification [CRTL]
- Zzzx
- Departure From Cited Designator [ZZZX]
- Quality Control Iaw Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- Fabrication Method [AARN]
- Permanent Mold Cast
- Heat Treatment [HEAT]
- As Cast
- Material Document And Classification [MDCL]
- Qq-C-390, Alloy 903 Fed Spec 1St Material Response
- Material [MATT]
- Copper Alloy 903
- Nondefinitive Spec/Std Data [ZZZT]
- D5 Composition And As Cast Condition And 3 Type
- Length [ABRY]
- 8.000 Feet Minimum And 12.000 Feet Maximum
DLA Procurement Analysis 9530-00-107-8502
Management Data 9530-00-107-8502
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 9530-00-107-8502
Freight Information 9530-00-107-8502
9530-00-107-8502 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 030220. A Sub NMFC of X. It has a NMFC Description of BBC BARS/BILLETS R RODS DRAWN ETC. 9530-00-107-8502 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 14750 which rates the freight between FCL and LCL. 9530-00-107-8502 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9530-00-107-8502 is not classified as a special type of cargo when transported by water. 9530-00-107-8502 is not a consolidation, but exceeds 84" in at least one dimension. It may not be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9530-00-107-8502
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 144.0" H x 5.0" W x 5.0" L
- --
- --
- --
- Any Suitable Process
- 144.0" H x 5.0" W x 5.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- Open for inspection or use only
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special requirement – See specific instructions or drawings provided