Premium Information is available for this item - Upgrade for $1 a day
9540-00-086-1485
Structural Beam
9540000861485 000861485 60-15552 23194 LS2349 AMS-QQ-A-200/3 PA12831
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
August 2023
23
Marketplace 9540-00-086-1485
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-086-1485 5+ Documents (More...)
AMS-QQ-A-200/3 CHANNEL,STRUCTURAL 3 EA NS Request Quotation Updated Every Day 9540-00-085-0538 RQST NE
PA5523 A structural AMS-QQ-A-200/3 ANGLE,STRUCTURAL 2 FT NS Request Quotation Subscribe to View
AMS-QQ-A-200/3 ANGLE,STRUCTURAL 3 EA NS Request Quotation Updated Every Day 9540-01-352-4383 RQST NE
QQA200-3 A specially shaped fabrication of ferrous or -200/ a ferrous AMS-QQ-A-200/3 BEAM,STRUCTURAL
QQA200-3 A specially shaped fabrication of ferrous or -200/ a ferrous AMS-QQ-A-200/3 BEAM,STRUCTURAL
2 FT AMS-QQ-A-200/3 BEAM https//www.nsnlookup.com ALLOY 2024 TMPR T AMS-STD-184 QQ-A-200/3 ASTM B221
QQA200-3 A specially shaped fabrication of ferrous or -200/ a ferrous AMS-QQ-A-200/3 BEAM,STRUCTURAL
2 FT AMS-QQ-A-200/3 BEAM https//www.nsnlookup.com ALLOY 2024 TMPR T AMS-STD-184 QQ-A-200/3 ASTM B221
BEAM,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation QQ-A-200/3 BEAM ,STRUCTURAL
BEAM,STRUCTURAL 3 FT NS Request Quotation QQ-A-200/3 BEAM ,STRUCTURAL AMS-QQ-A-200/3 BEAM,STRUCTURAL
Restrictions 9540-00-086-1485
9540-00-086-1485 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-00-086-1485
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Australia (ZA01)
- Effective Date:
- 1 Jun 2010
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-00-086-1485
- Part Number
- Manufacturer
- Status
- 23194
- Manufacturer
- 77783 - Alcoa/Reynolds Metals Company (Active)
- Primary Buy
- Primary Buy
- 60-15552
- 29321 - Transtar Metals Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AMS-QQ-A-200/3
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- LS2349
- 98897 - Lockheed Martin Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- PA12831
- 06012 - Transtar Metals Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-086-1485
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Z Shape
- Bottom Flange Width [BQJH]
- 0.950 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.050 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Material [MATT]
- Aluminum Alloy
- Left Side Top Flange Thickness [ADXR]
- 0.050 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 0.078 Feet Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.050 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 0.250 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.040 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.110 Pounds Per Linear Foot
- Top Flange Width [BQJG]
- 0.850 Inches Nominal
DLA Procurement Analysis 9540-00-086-1485
Management Data 9540-00-086-1485
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9540-00-086-1485
Freight Information 9540-00-086-1485
9540-00-086-1485 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-086-1485 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-086-1485 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-086-1485 is not classified as a special type of cargo when transported by water. 9540-00-086-1485 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-086-1485
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9540-00-086-1485 4 Records
Contracting Technical Data File (CTDF) 9540-00-086-1485 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: