Premium Information is available for this item - Upgrade for $1 a day
9540-00-246-4395
Structural Beam
9540002464395 002464395 AMS-QQ-A-200/11 LS5673 182395 60-3316 28505 PA21054 QQA200-11
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
13
Marketplace 9540-00-246-4395
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-246-4395 5+ Documents (More...)
QQA200-11 ANGLE,STRUCTURAL 603 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request
Quotation QQA200-11 ANGLE,STRUCTURAL BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE
-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL AMS-QQ-A-200/11 ANGLE,STRUCTURAL
,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA
ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL AMS-QQ-A-200/11 ANGLE,STRUCTURAL
000056318 LS32712-1 AMS-QQ-A-200/11 Quotation QQA200-11 Angle9540000056297 000056297 LS33704-1 T11787
AMS-QQ-A-200/11 ANGLE,STRUCTURAL 3 EA NS Request Quotation QQA200-11 ANGLE,STRUCTURAL BEAM,STRUCTURAL
NS Request Quotation QQA200-11 BEAM,STRUCTURAL 603 EA NS Request Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL
603 EA NS Request Quotation AMS-QQ-A-200/11 BEAM,STRUCTURAL 3 EA NS Request Quotation AMS-QQ-A-200/11
a ferrous or nonferrous material and resembles AMS-QQ-A-200/11 Quotation AMS-QQ-A-200/11 ANGLE,STRUCTURAL
Restrictions 9540-00-246-4395
9540-00-246-4395 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 9540-00-246-4395
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9540-00-246-4395
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
Approved Sources 9540-00-246-4395
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/11
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- LS5673
- 98897 - Lockheed Martin Corp (Active)
- Incomplete Reference
- Incomplete Reference
- 182395
- 01634 - Aluminum Co Of America (Active)
- Incomplete Reference
- Incomplete Reference
- 60-3316
- 29321 - Transtar Metals Corp (Active)
- Secondary Buy
- Secondary Buy
- AMS-QQ-A-200/11
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 28505
- 27610 - International Light Metals Corp Sub (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- PA21054
- 06012 - Transtar Metals Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- QQA200-11
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-246-4395
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Z Shape
- Bottom Flange Width [BQJH]
- 0.900 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.060 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.060 Inches Nominal
- First Tip Inner Radius [CNBD]
- 0.030 Inches Nominal
- First Tip Outer Radius [CNBJ]
- 0.030 Inches Nominal
- First Tip Style [CMZY]
- Square W/ Inner And Outer Corner Radii
- Heat Treatment [HEAT]
- T-6 Solution Heat Treated
- Material [MATT]
- Aluminum Alloy Ams-Qq-A-200/11, Alloy 7075
- Nondefinitive Spec/Std Data [ZZZT]
- T6 Temper
- Outer Radius Where Bottom Right Flange Joins Web Flange [BQKR]
- 0.030 Inches Nominal
- Outer Radius Where Top Left Flange Joins Web Flange [BQKQ]
- 0.030 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.048 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Bottom Flange Thickness [BMPQ]
- 0.048 Inches Nominal
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 0.486 Inches Nominal
- Web Flange Thickness [BPXN]
- 0.048 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.118 Pounds Per Linear Foot
- Top Flange Width [BQJG]
- 0.750 Inches Nominal
Weapon Systems (WSDC) 9540-00-246-4395
DLA Procurement Analysis 9540-00-246-4395
- Last Stock Position:
- 126 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-00-246-4395
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 9540-00-246-4395
Freight Information 9540-00-246-4395
9540-00-246-4395 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-246-4395 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-246-4395 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-246-4395 is not classified as a special type of cargo when transported by water. 9540-00-246-4395 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-246-4395
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 9540-00-246-4395 3 Records
Contracting Technical Data File (CTDF) 9540-00-246-4395 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: