Premium Information is available for this item - Upgrade for $1 a day
9540-00-402-2849
Structural Beam
9540004022849 004022849 AND10138-0404 QQA200-3 AMS-QQA200-3
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
January 2023
11
Marketplace 9540-00-402-2849
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-402-2849 5+ Documents (More...)
AMS-QQ-A-200/3 BEAM,STRUCTURAL ,STRUCTURAL AMS-QQ-A https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-402-2849
Structural Beam 9540004022849 004022849 for $1 a day Upgrade your Account Upgrade 9540-00-402-2849Structural
BEAM,STRUCTURAL 3 FT NS Request Quotation QQ-A- https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-402-2849
Structural Beam 9540004022849 004022849 for $1 a day Upgrade your Account Upgrade 9540-00-402-2849Structural
www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-085-0558 Structural Angle 9540000850558 000850558 AMS-QQA200-3
your Account Upgrade 9540-00-008-2223Structural Channel9540000082223 000082223LSM16021QQA200 -3 AMS-QQA200-3
Beam9540000082215 000082215AMS-QQA200-3LS10138-1004-2AND10138-1004QQA200-3 A structural shape fabricated AMS-QQA200-3
www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-085-0558 Structural Angle 9540000850558 000850558 AMS-QQA200-3
flange A structural shape fabricated from a ferrous or nonferrous material and resembling the AMS-QQA200-3
AMS-QQA200-3 A structural shape fabricated from a ferrous or nonferrous material and has a flange
Restrictions 9540-00-402-2849
9540-00-402-2849 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 9540-00-402-2849
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-00-402-2849
- Part Number
- Manufacturer
- Status
- AMS-QQA200-3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AND10138-0404
- 99237 - Airforce-Navy Aeronautical Design (Active)
- Incomplete Standard
- Incomplete Standard
- QQA200-3
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQA200-3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-402-2849
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- Z Shape
- Bottom Flange Width [BQJH]
- 0.750 Inches Nominal
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Bottom Right Flange Joins Web Flange/Leg [BPXM]
- 0.125 Inches Nominal
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- First Tip Radius [AJJB]
- 0.063 Inches Nominal
- First Tip Style [CMZY]
- Lower Radius
- Heat Treatment [HEAT]
- T-8511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- T8511 Temper
- Left Side Top Flange Thickness [ADXR]
- 0.063 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 90.0 Degrees Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Bottom Inside Angle [CWKK]
- 90.0 Degrees Nominal
- Right Side Bottom Flange Thickness [BMPQ]
- 0.063 Inches Nominal
- Second Tip Radius [CMZZ]
- 0.063 Inches Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Not Identical
- Second Tip Style [CNQK]
- Upper Radius
- Overall Height [ABKW]
- 0.500 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.150 Pounds Per Linear Foot
- Web Flange Thickness [BPXN]
- 0.063 Inches Nominal
- Top Flange Width [BQJG]
- 0.750 Inches Nominal
NATO Stock Numbers Related to 9540-00-402-2849
Freight Information 9540-00-402-2849
9540-00-402-2849 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013220. A Sub NMFC of X. It has a NMFC Description of ALUM BEAMS. 9540-00-402-2849 is rated as class 60 when transported by Less-Than Truckload (LTL) freight. 9540-00-402-2849 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 05420 which rates the freight between FCL and LCL. 9540-00-402-2849 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-402-2849 is not classified as a special type of cargo when transported by water. 9540-00-402-2849 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-402-2849
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- --
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special requirement – See specific instructions or drawings provided