Premium Information is available for this item - Upgrade for $1 a day
9540-00-406-8085
Structural Beam
9540004068085 004068085 AMS-QQ-A-200/3 16682 AMS-STD-184 60-8577 LS 6361 AMS-QQ-A-200 PA13176 QQ-A-200/3 28114
A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges. View more Structural Beam
November 2023
20
Marketplace 9540-00-406-8085
Request a Quotation from participating marketplace vendors
Related Documents 9540-00-406-8085 5+ Documents (More...)
AMS-STD-184 /3 ALLOY 2024 TMPR T 23157 60-751 37725 QQ-A-200/3 ASTM B221AMS-STD-184AMS-QQ-A-200/
-200 AMS-STD-184 https//www.nsnlookup.com /fsg-95/fsc-9540/us 9540-00-406-8085 Structural Beam 9540004068085
/fsg-95/fsc-9540/us 9540-00-406-8085 Structural Beam 9540004068085 004068085 2 FT AMS-QQ-A-200/3 BEAM
https//www.nsnlookup.com LS4739 AMS-QQ-A-200/ -200 AMS-STD-184 LS4739 AMS-QQ-A -200/ a ferrous AMS-QQ-A
/3 ALLOY 2024 TMPR T AMS-STD-184 QQ-A-200/3 ASTM B221 A structural shape fabricated AMS-QQ-A-200/
-95/fsc-9540/us 9540-00-406-8085 Structural Beam 9540004068085 004068085 2 FT AMS-QQ-A-200/3 BEAM https
QQ-A-200/3 BEAM,STRUCTURAL 1 FT NS Request Quotation AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation
AMS-QQ-A-200/3 BEAM,STRUCTURAL 3 FT NS Request Quotation QQ-A-200/3 BEAM,STRUCTURAL 1 FT NS Request Quotation
-200 AMS-STD-184 LS4739 AMS-QQ-A-200/ a ferrous AMS-QQ-A-200/3 BEAM,STRUCTURAL 2 FT AMS-QQ-A-200/3 BEAM
-200 AMS-STD-184 LS4739 AMS-QQ-A-200/ a ferrous AMS-QQ-A-200/3 BEAM,STRUCTURAL 2 FT AMS-QQ-A-200/3 BEAM
Restrictions 9540-00-406-8085
9540-00-406-8085 is a Structural Beam that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 9540-00-406-8085
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 9540-00-406-8085
- US Air Force (FGGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FGKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2014
- Supplementary Collaborators:
- GG
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 9540-00-406-8085
- Part Number
- Manufacturer
- Status
- AMS-QQ-A-200/3
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-QQ-A-200
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- 16682
- 77783 - Alcoa/Reynolds Metals Company (Active)
- Incomplete Reference
- Incomplete Reference
- AMS-STD-184
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 60-8577
- 29321 - Transtar Metals Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- LS 6361
- 98897 - Lockheed Martin Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AMS-QQ-A-200
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-QQ-A-200/3
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AMS-STD-184
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- PA13176
- 06012 - Transtar Metals Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- QQ-A-200/3
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 28114
- 27610 - International Light Metals Corp Sub (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 9540-00-406-8085
- Characteristic
- Specifications
- FIIG
- Specifications
- A13100
- Basic Shape Style [AGTA]
- T Shape
- Fabrication Method [AARN]
- Extruded
- Fillet Radius Where Top Left Flange Joins Web Flange/Leg [BPXJ]
- 0.125 Inches Nominal
- Fillet Radius Where Top Right Flange Joins Web Flange/Leg [BPXL]
- 0.125 Inches Nominal
- First Tip Style [CMZY]
- Square End
- Heat Treatment [HEAT]
- T-3511 Solution Heat Treated
- Material Document And Classification [MDCL]
- Qq-A-200/3 Fed Spec 1St Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Nondefinitive Spec/Std Data [ZZZT]
- T3511 Temper
- Left Side Top Flange Distance To Center Of Both Flanges [BPXD]
- 1.508 Inches Nominal
- Left Side Top Flange Thickness [ADXR]
- 0.063 Inches Nominal
- Left Top Inside Angle [CSMZ]
- 106.0 Degrees Nominal
- Leg Thickness [AJJP]
- 0.063 Inches Nominal
- Length [ABRY]
- 10.000 Feet Minimum And 12.000 Feet Maximum
- Right Side Top Flange Distance To Center Of Both Flanges [BPXG]
- 2.491 Inches Nominal
- Right Side Top Flange Thickness [ADXS]
- 0.063 Inches Nominal
- Right Top Inside Angle [CRZC]
- 74.0 Degrees Nominal
- Second Tip Relationship To First Tip [CNQJ]
- Identical
- Overall Height [ABKW]
- 1.570 Inches Nominal
- Weight Per Unit Measure [BRFD]
- 0.426 Pounds Per Linear Foot
- Third Tip Relationship To Preceding Tips [CNQL]
- Identical W/First Tip
- Top Flange Width [BQJG]
- 3.999 Inches Nominal
DLA Procurement Analysis 9540-00-406-8085
- Last Stock Position:
- 114 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 9540-00-406-8085
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 9540-00-406-8085
Freight Information 9540-00-406-8085
9540-00-406-8085 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 104420. A Sub NMFC of X. It has a NMFC Description of BEAMS NOI I/S. 9540-00-406-8085 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 53800 which rates the freight between FCL and LCL. 9540-00-406-8085 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 9540-00-406-8085 is not classified as a special type of cargo when transported by water. 9540-00-406-8085 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 9540-00-406-8085
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- No Requirement
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 9540-00-406-8085 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: