NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 951 results (0.06 seconds)
- 5310-01-132-3954 WASHERMore Info ...
- 5998-00-448-4404 CIRCUIT CARD ASSEMBLYMore Info ...
- 4720-01-609-3787 HOSE,NONMETALLICMore Info ...
- 5905-01-232-5593 RESISTOR,VARIABLE,WIRE WOUND,PRECISIONMore Info ...
- SECTION QUANTITY
- 1
- ELECTRICAL RESISTANCE PER SECTION
- 10.0 KILOHMS SINGLE SECTION
- RESISTANCE TOLERANCE PER SECTION IN PERCENT
- -5.0 TO 5.0 SINGLE SECTION
- MAXIMUM RUNNING TORQUE
- 0.50 INCH-OUNCES
- TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS
- -20.0 TO 20.0 SINGLE SECTION
- 5315-00-598-7134 KEY,MACHINEMore Info ...
- HARDNESS RATING
- 90.0 ROCKWELL B MINIMUM OVERALL AND 102.0 ROCKWELL B MAXIMUM OVERALL
- MATERIAL
- STEEL OVERALL
- KEY CHAMFER ANGLE
- 30.0 DEGREES NOMINAL
- KEY CHAMFER LENGTH
- 0.104 INCHES NOMINAL
- OVERALL HEIGHT
- 0.149 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
- 6515-01-437-2532 CANNULA,NASAL,OXYGENMore Info ...
- SPECIAL FEATURES
- CURVED; NON-FLARE TIP; 7 FT (84 INCH); DISPOSABLE; CRUSH-RESISTANT OXYGEN TUBING; OVER-THE-EAR STYLE; FOR USE IN THE ADMINISTRATION OF NASAL OXYGEN
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- CANNULA NASAL OXYGEN CURVED NON-FLARE TIP 7FT DISP 50S
- 5310-00-136-6133 WASHER,FLATMore Info ...
- CENTER HOLE SHAPE STYLE
- ROUND
- CROSS-SECTIONAL SHAPE STYLE
- RECTANGULAR
- HOLE DIAMETER
- 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
- MATERIAL
- STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 316 OVERALL
- OVERALL DIAMETER
- 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
- 6130-00-136-6220 FIXTURE,CELL DISCHAMore Info ...
- 5905-00-136-6368 RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISIONMore Info ...
- ELECTRICAL RESISTANCE PER SECTION
- 100.000 KILOHMS SINGLE SECTION
- ACTUATOR TYPE
- SINGLE SHAFT
- MOUNTING METHOD
- STANDARD BUSHING
- POWER DISSIPATION RATING PER SECTION IN WATTS
- 0.5 FREE AIR SINGLE SECTION
- RELIABILITY INDICATOR
- NOT ESTABLISHED
- 5945-00-136-6348 RELAY,ELECTROMAGNETICMore Info ...
- DUTY TYPE
- CONTINUOUS
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
- 2.000 INCHES NOMINAL SINGLE MOUNTING FACILITY
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
- 1.812 INCHES NOMINAL SINGLE MOUNTING FACILITY
- COIL QUANTITY
- 1
- ENVIRONMENTAL PROTECTION
- HERMETIC
