NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 980 results (0.05 seconds)
- 6105-17-122-9918 MOTOR,ALTERNATING CURRENTMore Info ...
- 5305-15-007-0760 VITE SPECIALEMore Info ...
- 6035-14-520-0993 ILLUMINATOR,FIBER OPTICMore Info ...
- 2040-00-972-8526 MOUNT,FILTERMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- ALUMINUM ALLOY,SAND CASTING 356,T6; 1.875 IN. W ON TAPPED END,TWO HOLES TAPPED THRU ONE SIDE 0.112-40 NC-3B; 1.375 IN. MIN AND 1.385 IN. MAX ID
- 5305-00-273-7387 SCREW,CAP,SOCKET HEADMore Info ...
- DEPARTURE FROM CITED DESIGNATOR
- AS MODIFIED BY THREAD LENGTH
- FASTENER LENGTH
- 6.000 INCHES NOMINAL
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL
- HEAD DIAMETER
- 0.863 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
- HEAD HEIGHT
- 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
- 5305-00-273-7433 SCREW,CAP,SOCKET HEADMore Info ...
- FASTENER LENGTH
- 1.250 INCHES NOMINAL
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL
- HEAD DIAMETER
- 0.739 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
- HEAD HEIGHT
- 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
- HEAD STYLE
- FLAT CHAMFER
- 5305-00-273-7250 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.219 INCHES NOMINAL
- HEAD DIAMETER
- 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- NOMINAL THREAD DIAMETER
- 0.086 INCHES
- 5305-00-273-7319 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
- HEAD DIAMETER
- 0.217 INCHES MINIMUM AND 0.236 INCHES MAXIMUM
- HEAD HEIGHT
- 0.083 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
- HEAD STYLE
- ROUND
- MINIMUM TENSILE STRENGTH
- 80000 POUNDS PER SQUARE INCH
- 5305-00-273-7418 SCREW,CAP,SOCKET HEADMore Info ...
- FASTENER LENGTH
- 0.750 INCHES NOMINAL
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL
- HEAD DIAMETER
- 0.553 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
- HEAD HEIGHT
- 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
- HEAD STYLE
- FLAT CHAMFER
- 4920-00-273-7662 FIXTURE,AIRCRAFT MAINTENANCEMore Info ...
- END ITEM IDENTIFICATION
- ROTARY ELECTRO-MECHANICAL ACTUATOR 181RA38R176
- FUNCTIONAL DESCRIPTION
- USED IN VISE FOR CHECKING CLUTCH TORQUE
- REFERENCE DATA AND LITERATURE
- TO 8A1-7-20-3
- SPECIAL FEATURES
- METAL HOLDING FIXTURE 4 IN. DIA,1.500 IN. H,TORQUE FIXTURE 0.281 IN. DIA,2 IN. LG; TO NAME: CLUTCH TORQUE SET
