NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 9868436 results (1.67 seconds)
- 6150-14-481-6685 CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICALMore Info ...
- 5945-12-391-6176 RELAY,ELECTROMAGNETICMore Info ...
- 5306-37-114-1536 BOLTMore Info ...
- 6110-00-523-4650 CONTROLLER,MOTORMore Info ...
- DUTY CYCLE
- CONTINUOUS
- AC VOLTAGE RATING
- 208.0 VOLTS MINIMUM AND 220.0 VOLTS MAXIMUM
- ACTUATION METHOD
- MAGNETIC
- ACTUATOR VOLTAGE
- 208.0 AC AND 220.0 AC
- CONTROL TYPE
- REMOTE
- 5998-01-088-6786 CIRCUIT CARD ASSEMBLYMore Info ...
- SPECIAL FEATURES
- PRINTED WIRING BOARD 1,RESISTOR 12,CAPACITOR 11,TRANSISTOR 2,INTREGRATED CIRCUIT 3
- 4730-01-553-2318 COUPLING HALF,QUICK DISCONNECTMore Info ...
- END ITEM IDENTIFICATION
- JEERV 4X4 EOD, 2355-01-532-2174, MRAP
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- AC FITTING QUICK DISCONNECT
- 5950-00-647-7730 TRANSFORMER,AUDIO FREQUENCYMore Info ...
- BODY HEIGHT
- 2.062 INCHES NOMINAL
- BODY LENGTH
- 1.188 INCHES NOMINAL
- BODY WIDTH
- 1.188 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
- 1.156 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
- 1.156 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
- 3820-01-396-2476 GUIDE SHOE,PIPE,WELLMore Info ...
- MATERIAL
- ALUMINUM ALLOY
- OVERALL LENGTH
- 18.000 INCHES NOMINAL
- OVERALL DIAMETER
- 6.625 INCHES NOMINAL
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- NPT INTERNAL THREAD ONE END
- SPECIAL FEATURES
- INSTALLED AT BOTTOM OF CASING STRING TO GUIDE CASING INTO THE HOLE
- 5315-01-050-5112 PIN,STRAIGHT,HEADEDMore Info ...
- DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN
- 0.041 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
- CHAMFER LENGTH
- 0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
- DIAMETER
- 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM
- FIRST HOLE DIAMETER
- 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
- HARDNESS RATING
- 26.5 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
- 1305-16-000-6708 CARTRIDGE,16 GAGE SHOTGUNMore Info ...
