NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 177 results (0.04 seconds)
- 5930-01-369-7559 SWITCH,FLOWMore Info ...
- END ITEM IDENTIFICATION
- MK542MOD0 AFTERBODY GRP TEST SET
- 5998-00-920-7678 CIRCUIT CARD ASSEMBLYMore Info ...
- OVERALL HEIGHT
- 1.500 INCHES NOMINAL
- OVERALL LENGTH
- 6.100 INCHES NOMINAL
- OVERALL WIDTH
- 2.600 INCHES NOMINAL
- SPECIAL FEATURES
- CAPACITOR FIXED 1; CAPACITOR VARIABLE 3; EYELET 50; NUT 6; PRINTED WIRING BOARD 1; RESISTOR FIXED 16; RESISTOR VARIABLE 4; SCREW 6; SEMICONDUCTOR 4; STANDOFF 4; TERMINAL 26; WASHER 18
- 1650-00-786-7706 CYLINDER,ACTUATING,LINEARMore Info ...
- 5330-01-200-7020 GASKETMore Info ...
- BOLT HOLE QUANTITY
- 6
- BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE
- 0.625 INCHES NOMINAL
- CROSS-SECTIONAL SHAPE STYLE
- SOLID SINGLE OR COMPOSITION
- CROSS-SECTIONAL THICKNESS
- 0.250 INCHES NOMINAL
- HARDNESS RATING
- 60.0 SHORE DUROMETER A-2 NOMINAL OVERALL
- 5950-01-501-2358 COIL,RADIO FREQUENCYMore Info ...
- END ITEM IDENTIFICATION
- FWD FUSELAGE; WSD: AIRCRAFT, EAGLE F-15
- DC RESISTANCE RATING IN OHMS
- 0.030 SINGLE COMPONENT SINGLE PRIMARY
- MAXIMUM OPERATING TEMP
- 90.0 DEG CELSIUS
- MOUNTING METHOD
- TERMINAL SINGLE GROUP
- INCLOSURE TYPE
- FULLY INCLOSED
- 5935-01-074-8787 PLATE,RETAINING,ELECTRICAL CONNECTORMore Info ...
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
- 1.375 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
- 1.375 INCHES NOMINAL
- MATERIAL
- ALUMINUM ALLOY
- MOUNTING FACILITY TYPE AND QUANTITY
- 4 NUT
- NOMINAL THREAD SIZE
- 0.138 INCHES
- 5365-00-269-2341 SPACER,SLEEVEMore Info ...
- END ITEM IDENTIFICATION
- FLIGHT INSTRUMENTS,INDICATOR,ALTITUDE
- BODY INSIDE DIAMETER
- 0.0950 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM
- BODY OUTSIDE DIAMETER
- 0.1500 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM
- CORNER SHAPE
- SQUARE ALL CORNERS
- MATERIAL
- STEEL OVERALL
- 7320-00-402-5408 BOWL,MIXING MACHINEMore Info ...
- 1680-99-601-0846 INSULATION MUFFMore Info ...
- 5305-00-010-0824 SCREW,MACHINEMore Info ...
