NSN Search by National Stock Number

Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.

The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:

Search NATO Stock Numbers
NIIN Lookups
Search by NSN Characteristic
Search by Keyword
Search NSN by CAGE Codes
CAGE Code Lookup

About 11 results (0.03 seconds)

7930-00-899-9534 DISHWASHING COMPOUND,HAND
More Info ...
PHYSICAL FORM
LIQUID
PRIMARY CONTAINER CONTENT QUANTITY
5.000 GALLONS
SPECIAL FEATURES
CONCENTRATED, NONABRASIVE, SYNTHETIC ORGANIC, MOBILE, STABLE, SINGLE-PHASE LIQUID COMPOUND, MILDLY PERFUMED, 26 PERCENT SYNTHETIC DETERGENTS; SOLUBLE IN 20 GRAINS PER GALLON HAND WATER; PH OF 6.5 TO 8.5; 1.0 PERCENT MAX. TOTAL ALKALINITY; 6.0 PECENT MAX., SODIUM CHLORIDE; FREE RINSING
NONDEFINITIVE SPEC/STD DATA
2 TYPE
NoPhoto
5340-01-053-2492 PLUG ASSEMBLY,SEALING
More Info ...
SPECIAL FEATURES
STEEL,ASTM A582 TY 416;PLUG AND PIN;0.1875 IN. MAX OD;0.267 IN. MAX LG;PIN 0.154 IN. DIA,0.181 IN. LG;PIN DRILLED ALONG AXIS CTR 0.040 IN. MAX DIA
NoPhoto
5340-01-046-7713 HANDLE,BOW
More Info ...
  • CAGE 89954
    569A601P6
    BAE SYSTEMS CONTROLS INC. [89954]
  • A486G
    10117572
    NIMIKKEISTOKESKUS NCB FINLAND [A486G]
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
4.500 INCHES NOMINAL
HANDLE CLEARANCE
1.375 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL
ALUMINUM ALLOY 6061 OVERALL
MOUNTING FACILITY QUANTITY
2
NoPhoto
5340-01-046-5903 CLAMP,LOOP
More Info ...
DISTANCE FROM LOOP CENTER TO TONGUE END
0.970 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.752 INCHES NOMINAL
CUSHIONING ENVIRONMENTAL PROTECTION
WEATHER RESISTANT AND OZONE RESISTANT
DIAMETER
0.204 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
NoPhoto
5340-01-048-1345 CLAMP,LOOP
More Info ...
DISTANCE FROM LOOP CENTER TO TONGUE END
1.795 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
1.500 INCHES NOMINAL
DIAMETER
0.204 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS
0.064 INCHES NOMINAL
NoPhoto
5340-01-049-6353 CLAMP,LOOP
More Info ...
  • 0U583
    AS23190
    SAE INTERNATIONAL [0U583]
  • 0U583
    AS25281
    SAE INTERNATIONAL [0U583]
  • CAGE 0U583
    MS25281-R28
    ZF INDUSTRIEANTRIEBE WITTEN GMBH [D9182]
  • CAGE 0U583
    MS25281R28
    MILITARY STANDARDS [96906]
  • CAGE 0U583
    AS23190
    SOCIETY OF AUTOMOTIVE ENGINEERS INC [81343]
DISTANCE FROM LOOP CENTER TO TONGUE END
1.585 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
1.275 INCHES MINIMUM AND 1.325 INCHES MAXIMUM
DIAMETER
0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM
MATERIAL THICKNESS
0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
MATERIAL
PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
NoPhoto
5340-01-053-7180 CLAMP,LOOP
More Info ...
DISTANCE FROM LOOP CENTER TO TONGUE END
1.371 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
1.152 INCHES NOMINAL
CUSHIONING ENVIRONMENTAL PROTECTION
WEATHER RESISTANT
DIAMETER
0.204 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/5 T4 OR T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
NoPhoto
5340-00-990-2092 CLAMP,LOOP
More Info ...
DISTANCE FROM LOOP CENTER TO TONGUE END
0.998 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.780 INCHES NOMINAL
CUSHIONING ENVIRONMENTAL PROTECTION
CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
DIAMETER
0.204 INCHES NOMINAL
MATERIAL THICKNESS
0.032 INCHES NOMINAL
NoPhoto
5340-01-057-5502 CLAMP,LOOP
More Info ...
DISTANCE FROM LOOP CENTER TO TONGUE END
0.810 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.592 INCHES NOMINAL
DIAMETER
0.204 INCHES NOMINAL
MATERIAL THICKNESS
0.031 INCHES NOMINAL
MATERIAL
STEEL COMP 321 BAND
NoPhoto
5340-01-057-5503 CLAMP,LOOP
More Info ...
DISTANCE FROM LOOP CENTER TO TONGUE END
0.872 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.654 INCHES NOMINAL
DIAMETER
0.204 INCHES NOMINAL
MATERIAL THICKNESS
0.031 INCHES NOMINAL
MATERIAL
STEEL COMP 321 BAND
NoPhoto