NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 15 results (0.06 seconds)
- 5330-99-525-2488 PACKING,PREFORMEDMore Info ...
- 3040-12-394-6221 CHOCK, CONTROL LEVEMore Info ...
- 5330-14-397-6069 GASKETMore Info ...
- 4820-00-453-9536 VALVE,LINE CHARGINGMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- 4.500 IN. H,CADMIUM PLATED,HANDWHEEL OPERATED,1ST END 1/4-18 NPT INTERNAL THD,2ND END 1/8-27 NPT INTERNAL,3RD END 7/8-16 UN 3B THD W/CENTERPIECE
- 5320-00-117-6943 RIVET,SOLIDMore Info ...
- COUNTERSINK ANGLE
- 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
- GRIP LENGTH
- 0.421 NOMINAL INCHES
- HEAD STYLE
- FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
- HEAD MAJOR DIAMETER
- 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
- 5320-00-117-6936 RIVET,SOLIDMore Info ...
- COUNTERSINK ANGLE
- 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
- HEAD STYLE
- FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
- HEAD MAJOR DIAMETER
- 0.183 INCHES MAXIMUM
- HEAT TREATMENT
- T-4 SOLUTION HEAT TREATED OVERALL
- 5320-00-117-6938 RIVET,SOLIDMore Info ...
- COUNTERSINK ANGLE
- 100.0 DEGREES NOMINAL
- CRITICALITY CODE JUSTIFICATION
- SUPP
- FASTENER LENGTH
- 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
- HEAD MAJOR DIAMETER
- 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
- HEAT TREATMENT
- T-4 SOLUTION HEAT TREATED OVERALL
- 5320-00-117-6937 RIVET,SOLIDMore Info ...
- COUNTERSINK ANGLE
- 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
- GRIP LENGTH
- 0.047 NOMINAL INCHES
- HEAD STYLE
- FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
- HEAD MAJOR DIAMETER
- 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
- 5330-00-954-9761 PACKING,TUBE SEALMore Info ...
- 5320-00-117-6939 RIVET,SOLIDMore Info ...
- COUNTERSINK ANGLE
- 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
- END ITEM IDENTIFICATION
- W/S:TEAMMATE, AN/TRQ-32; RADAR SET, AN/TPN-18; AIRBORNE MOBILE DIR AIR SPT CTL (2ID),(02M JUL83)(AN/UYQ-3A); AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); COMMUNICATIONS TERMINAL, SATELLITE AN/GSC-39(V)1; TRAFFIC JAM, AN/TLQ-17A; AIRCRAFT, THUNDERBOLT II, A-10; SUPPOORT EQUIPMENT, B-52 AIRCRAFT; SUPPORT EQUIPMENT, B-1 AIRCRAFT; MISSILE, ADVANCED MEDIUM RANGE AIR-TO-AIR (AMRAAM)/AIM120A
- FASTENER LENGTH
- 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
- HEAD STYLE
- FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
- HEAD MAJOR DIAMETER
- 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
