NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 17 results (0.02 seconds)
- 4820-14-307-1108 VALVE,LINEAR,DIRECTIONAL CONTROLMore Info ...
- 5340-01-425-2424 BUMPERMore Info ...
- MATERIAL
- RUBBER NATURAL OR RUBBER SYNTHETIC
- OVERALL HEIGHT
- 3.500 INCHES NOMINAL
- OVERALL LENGTH
- 6.000 INCHES NOMINAL
- OVERALL WIDTH
- 3.000 INCHES NOMINAL
- STYLE DESIGNATOR
- ERR-090
- 1650-00-671-5613 PLUG,METALLIC,SEALINGMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- ALUMINUM ALLOY,PER QQ&A&225-6A,ANODIZE PER MIL&A&8625 TY 2,0.275 IN.LG,0.500 IN. OD
- 4920-00-926-3747 FIXTURE,AIRCRAFT MAINTENANCEMore Info ...
- 5998-00-659-9379 CIRCUIT CARD ASSEMBLYMore Info ...
- OVERALL HEIGHT
- 0.620 INCHES NOMINAL
- OVERALL LENGTH
- 7.220 INCHES NOMINAL
- OVERALL WIDTH
- 4.440 INCHES NOMINAL
- SPECIAL FEATURES
- CAPACITOR 11; CONNECTOR 1; DIODE 8; JACK,TIP 1; PRINTED WIRING BOARD 1; RESISTOR 34; TRANSFORMER 1
- 5998-00-754-7376 CIRCUIT CARD ASSEMBLYMore Info ...
- OVERALL HEIGHT
- 0.620 INCHES NOMINAL
- OVERALL LENGTH
- 7.220 INCHES NOMINAL
- OVERALL WIDTH
- 4.440 INCHES NOMINAL
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- FSC APPLICATION DATA: 1-ANTENNA-RECEIVER TRANSMITTER GROUP,GUIDED MISSILE
- SPECIAL FEATURES
- CAPACITORS 11; DIODE 1; PRINTED WIRING BOARD 1; RESISTORS 31; TRANSFORMER 1; TRANSISTORS 7
- 4920-01-382-1378 FIXTURE,AIRCRAFT MAINTENANCEMore Info ...
- NOMINAL OVERALL LENGTH
- 19.000 INCHES
- NOMINAL OVERALL WIDTH
- 7.000 INCHES
- NOMINAL OVERALL HEIGHT
- 9.000 INCHES
- END ITEM IDENTIFICATION
- ACFT F/A-18 NON-HSP (HORNET SUPPORT PLAN) SUPPORT
- 4920-00-099-9017 FIXTURE,HYDRAULIC SYSTEM COMPONENTS,AIRCRAFTMore Info ...
- FUNCTIONAL DESCRIPTION
- USED TO HOLD AND ALIGN THE DRIVE SHAFT OF THE HYDRAULIC PUMP, DURING INSTALLATION OF THE PRESS FIT DRIVE SHAFT BEARINGS
- END ITEM IDENTIFICATION
- F-15 ACFT; HYDRAULIC MANIFOLD AND PUMP SUPPLY AP19V-3-12
- NOMINAL OVERALL WIDTH
- 2.000 INCHES
- NOMINAL OVERALL DIAMETER
- 6.000 INCHES
- REFERENCE DATA AND LITERATURE
- SERD NO. 0904; TO 9H4-3-69-3
- 4920-01-416-4703 CASE,ELECTRICAL-ELECTRONIC TEST AND MEASURING EQUIPMENTMore Info ...
- END ITEM IDENTIFICATION
- USED ON F-18 AIRCRAFT
- 4920-01-417-4344 FIXTURE,AIRCRAFT MAINTENANCEMore Info ...
