NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 1005379 results (0.06 seconds)
- 5998-00-019-4683 PRINTED CIRCUIT BOARDMore Info ...
- END ITEM IDENTIFICATION
- AVIONICS POSITION FIXING AND GND SUPPORT
- 2010-00-936-8930 SHAFT,PROPULSION,SHIPMore Info ...
- AFTER END DESIGN
- TAPERED
- AFTER END KEYWAY
- PROVIDED
- CONSTRUCTION
- SOLID
- DEPTH
- 0.251 INCHES MINIMUM AND 0.254 INCHES MAXIMUM
- FORWARD END DIAMETER
- 2.000 INCHES NOMINAL
- 2010-00-783-5785 PROPELLER,MARINEMore Info ...
- 5305-00-042-1209 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.875 INCHES NOMINAL
- HEAD DIAMETER
- 0.348 INCHES MINIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- NOMINAL THREAD DIAMETER
- 0.190 INCHES
- 5305-00-022-0638 SCREW,CAP,HEXAGON HEADMore Info ...
- DEPARTURE FROM CITED DOCUMENT
- AS MODIFIED BY HOLE TYPE AND QUANTITY
- FASTENER LENGTH
- 1.500 INCHES NOMINAL
- HARDNESS RATING
- 100.0 ROCKWELL B MAXIMUM OVERALL
- HEAD HEIGHT
- 0.312 INCHES NOMINAL
- HEAD STYLE
- HEXAGON
- 5305-00-022-5593 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.875 INCHES NOMINAL
- HEAD DIAMETER
- 0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM
- HEAD HEIGHT
- 0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
- HEAD STYLE
- FILLISTER
- NOMINAL THREAD DIAMETER
- 0.312 INCHES
- 5305-00-017-9881 SCREW,CAP,HEXAGON HEADMore Info ...
- 2530-00-026-4617 AXLE,VEHICULAR,NONDRIVINGMore Info ...
- AXLE CONSTRUCTION
- TUBULAR
- DISTANCE BETWEEN SPRING SEAT CENTERS
- 31.750 INCHES NOMINAL
- FURNISHED AXLE COMPONENTS
- SPINDLE
- DESIGN TYPE
- RIGID SPINDLE
- SPECIAL FEATURES
- LENGTH O/A 49.563 IN.;DESIGN FORM:STRAIGHT;LARGEST WHEEL BEARING SURFACE DIA:0.750 IN.;SPINDLE EFFECTIVE LG:5.969
- 5305-00-012-0678 SCREW,CAP,HEXAGON HEADMore Info ...
- 5305-00-055-0995 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.250 INCHES NOMINAL
- HEAD DIAMETER
- 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM
- HEAD HEIGHT
- 0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM
- HEAD STYLE
- BINDING
- NOMINAL THREAD DIAMETER
- 0.086 INCHES
