NSN Search by National Stock Number

Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.

The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:

Search NATO Stock Numbers
NIIN Lookups
Search by NSN Characteristic
Search by Keyword
Search NSN by CAGE Codes
CAGE Code Lookup

About 18 results (0.32 seconds)

5845-99-421-8580 MODIFICATION KIT,SO
More Info ...
  • K1806
    113-891
    MINISTRY OF DEFENCE, DE&S UNDERWATER [K1806]
  • U1278
    0633-193624
    MINISTRY OF DEFENCE (NAVY) [U1278]
NoPhoto
6750-01-427-0648 FILM,PHOTOGRAPHIC
More Info ...
  • CAGE 13873
    113891
    DU PONT E I DE NEMOURS AND CO INC [82348]
  • CAGE 13873
    CVCPIC
    DLA AVIATION ENGINEERING [13873]
SPECIAL FEATURES
BRAND NAME DESCRIPTION AQM - 8 GAUGE;ADDITIONAL ITEM INFORMATION AQM 25-5/64 X 17-3/8 X .008,R;REQUIRED MINIMUM ORDER QUANTITY 1;REQUIRED MULTIPLE ORDER QUANTITY 1
NoPhoto
1720-00-316-0378 SPOOL VALVE
More Info ...
  • CAGE 62983
    113891
    EATON AEROSPACE, LLC [62983]
NoPhoto
5935-01-052-4268 SOCKET,PLUG-IN ELECTRONIC COMPONENTS
More Info ...
  • CAGE 89022
    499-057-014
    L3HARRIS INTERSTATE ELECTRONICS [07421]
  • CAGE 89022
    116720-003
    TDK-LAMBDA AMERICAS INC. [89022]
  • 16237
    180-3
    CONNECTOR CORP [16237]
  • 16237
    180-03
    CONNECTOR CORP [16237]
  • CAGE 89022
    113891
    TDK-LAMBDA AMERICAS INC. [89022]
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH
1.090 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH
0.695 INCHES NOMINAL
FABRICATION METHOD
LAMINATED
MOUNTING HOLE DIAMETER
0.136 INCHES NOMINAL AND 0.143 INCHES NOMINAL
MOUNTING HOLE STYLE
FOUR MOUNTING HOLES/SLOTS
NoPhoto
5961-99-727-5255 SEMICONDUCTOR DEVICE,DIODE
More Info ...
  • K5057
    1N5656A
    SEMITRON INDUSTRIES LTD [K5057]
  • K5057
    L13B91
    SEMITRON INDUSTRIES LTD [K5057]
NoPhoto
5315-98-207-6820 KEY,MACHINE
More Info ...
  • E0062
    113891
    HAMILTON C W F & CO LTD HAMILTON JET [E0062]
NoPhoto
3110-00-019-9386 BEARING,BALL,DUPLEX
More Info ...
  • CAGE 06144
    113891
    INDUSTRIAL TECTONICS BEARINGS [06144]
  • 62793
    113891
    BFM ENERGY PRODUCTS CORP [62793]
  • 62793
    118390-15
    BFM ENERGY PRODUCTS CORP [62793]
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SPECIAL TEST FEATURES
SPECIAL QUALITY CONTROL TESTING
STYLE DESIGNATOR
COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
TEST DATA DOCUMENT
81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
NoPhoto
5310-01-120-3835 WASHER,FLAT
More Info ...
CENTER HOLE SHAPE STYLE
ROUND
CROSS-SECTIONAL SHAPE STYLE
RECTANGULAR
HARDNESS RATING
25.0 ROCKWELL C MINIMUM AND 29.0 ROCKWELL C MAXIMUM
HOLE DIAMETER
0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NoPhoto
4520-00-202-9989 HEATING ELEMENT,ELECTRICAL,NONIMMERSION TYPE
More Info ...
BODY STYLE
STRIP ELEMENT
OVERALL LENGTH
24.000 INCHES NOMINAL
WIDTH
11.812 INCHES NOMINAL
MATERIAL
STEEL SHEATH
VOLTAGE IN VOLTS AND CURRENT TYPE
230.0 AC SINGLE VOLTAGE
NoPhoto
2310-99-893-6265 AUTOMOBILE,SEDAN
More Info ...
NoPhoto