NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 9920 results (0.04 seconds)
- 5305-01-161-5501 SCREW,CAP,HEXAGON HEADMore Info ...
- 4240-01-540-8549 LENS,HELMET,WELDER'SMore Info ...
- MATERIAL
- GLASS
- NATIONAL BUREAU OF STANDARDS SHADE NUMBER
- 12
- LENS TYPE
- FILTER
- 6640-00-484-5675 SLIDE,MICROSCOPEMore Info ...
- 6910-01-083-2589 TRAINING AID,FACEPIECE,LIGHT ATTENUATION GOGGLEMore Info ...
- 4920-00-151-4500 RACK,STORAGE,PODSMore Info ...
- END ITEM IDENTIFICATION
- AN/ALQ-119
- 5305-00-151-0106 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 1.281 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
- HEAD DIAMETER
- 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 125000 POUNDS PER SQUARE INCH
- 5305-00-151-0206 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.438 INCHES NOMINAL
- HEAD DIAMETER
- 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5306-00-151-0661 BOLT,CLEVISMore Info ...
- DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER
- 3.859 INCHES MINIMUM FIRST HOLE AND 3.891 INCHES MAXIMUM FIRST HOLE
- FASTENER LENGTH
- 4.047 INCHES NOMINAL
- GROOVE DIAMETER
- 0.417 INCHES MINIMUM AND 0.427 INCHES MAXIMUM
- HARDNESS RATING
- 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
- HEAD DIAMETER
- 0.875 INCHES NOMINAL
- 5305-00-151-0339 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.750 INCHES NOMINAL
- HEAD DIAMETER
- 0.187 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
- HEAD HEIGHT
- 0.081 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
- HEAD STYLE
- FILLISTER
- MINIMUM TENSILE STRENGTH
- 60000 POUNDS PER SQUARE INCH
- 5305-00-151-1677 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
- HEAD DIAMETER
- 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- NOMINAL THREAD DIAMETER
- 0.190 INCHES
