NSN Search by National Stock Number

Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.

The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:

Search NATO Stock Numbers
NIIN Lookups
Search by NSN Characteristic
Search by Keyword
Search NSN by CAGE Codes
CAGE Code Lookup

About 13 results (0.02 seconds)

4820-00-003-2806 VALVE,REGULATING,TEMPERATURE
More Info ...
  • CAGE 98437
    12C600
    ELLIS & WATTS INTERNATIONAL, LLC [98437]
  • CAGE 98437
    12C3-5M1
    ELLIS & WATTS INTERNATIONAL, LLC [98437]
NoPhoto
4520-01-373-0533 LATCH,HEATER DOOR
More Info ...
END ITEM IDENTIFICATION
4520-01-354-1191
GENERAL CHARACTERISTICS ITEM DESCRIPTION
8MATERIAL IS 14GA. STEEL SHEET; O/A LG IS 1.5IN.,O/A W IS 0.5IN.; 0.203IN. DIA THRU HOLE 0.31IN. FROM ONE END FOR RIVETING TO HEATER SHELL; OPPOSITE END FITS OVER HEATER DOOR AND HAS A TAB 0.44IN. WIDE PROJECTING 0.38IN. TO GRASP WHEN ROTATING LATCH
NoPhoto
7920-01-294-0158 BRUSH,WIRE,SCRATCH
More Info ...
NoPhoto
3120-00-957-1387 BEARING,PLAIN,ROD END
More Info ...
BORE CENTER TO SHANK END DISTANCE
4.6000 INCHES NOMINAL
BORE DIAMETER
0.5625 INCHES NOMINAL
FEATURES PROVIDED
FLUSH LUBRICATION FITTING
OUTER MEMBER OUTSIDE DIAMETER
1.6200 INCHES NOMINAL
OUTER MEMBER WIDTH
0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM
NoPhoto
4520-01-373-0534 SHELL,HEATER TOP
More Info ...
GENERAL CHARACTERISTICS ITEM DESCRIPTION
SHELL IS 14GA SHEET STEEL; 9.75IN. HIGH AND 16.12IN. DIA AT TOP; SHELL HAS A FLUE COLLAR OF 14GA SHEET STEEL 1.75IN. HIGH AND 3.88IN. DIA AT TOP; 3 TABS 0.125IN. THICK SHEET STEEL,1IN. WIDE AND 1.12IN. LONG FOR ATTACHING TO RETAINER EYEBOLTS ON BOTTOM SHELL
END ITEM IDENTIFICATION
4520-01-354-1191
NoPhoto
6625-01-317-0345 PROBE,TEST
More Info ...
  • 03950
    S-1516
    NAVAL INVENTORY CONTROL POINT [03950]
  • 5M149
    S-1516
    BROOKSTONE CO [5M149]
NoPhoto
5998-01-335-7120 RETAINER-EJECTOR,ELECTRICAL CARD
More Info ...
  • 5M1W8
    129397-02
    EVANS PRECISION MACHINING, INC. [5M1W8]
  • CAGE 5M1W8
    129397-2
    ROCKWELL COLLINS, INC. [09344]
  • 0CGL9
    129397-02
    EVANS PRECISION MACHINING INC. [0CGL9]
  • A486G
    10139259
    NIMIKKEISTOKESKUS NCB FINLAND [A486G]
BODY STYLE
EXTRACTOR
OVERALL LENGTH
0.535 INCHES NOMINAL
OVERALL HEIGHT
1.206 INCHES NOMINAL
OVERALL WIDTH
0.325 INCHES NOMINAL
COLOR
YELLOW
NoPhoto
5998-01-335-7119 RETAINER-EJECTOR,ELECTRICAL CARD
More Info ...
  • 5M1W8
    129397-01
    EVANS PRECISION MACHINING, INC. [5M1W8]
  • CAGE 5M1W8
    129397-1
    ROCKWELL COLLINS, INC. [09344]
  • 0CGL9
    129397-01
    EVANS PRECISION MACHINING INC. [0CGL9]
  • A486G
    10139258
    NIMIKKEISTOKESKUS NCB FINLAND [A486G]
BODY STYLE
EXTRACTOR
OVERALL LENGTH
0.535 INCHES NOMINAL
OVERALL HEIGHT
1.206 INCHES NOMINAL
OVERALL WIDTH
0.325 INCHES NOMINAL
COLOR
YELLOW
NoPhoto
4520-01-374-8268 SUPERHEATER ASSEMBLY
More Info ...
MATERIAL
STEEL CORROSION RESISTING
OVERALL LENGTH
5.830 INCHES NOMINAL
OVERALL DIAMETER
6.380 INCHES NOMINAL
GENERAL CHARACTERISTICS ITEM DESCRIPTION
INCLUDES TWO 5-13-4423 SUPERHEATER PLATES AND THREE 5-13-6352 SUPERHEATER LEG
END ITEM IDENTIFICATION
4520-01-329-3451,HEATER,SPACE
NoPhoto
4520-01-373-3145 BASEPLATE,SPACE HEATER
More Info ...
GENERAL CHARACTERISTICS ITEM DESCRIPTION
MATERIAL STEEL; CONSISTS OF A SHELL 14GA. SHEET STEEL 13.50IN. HIGH AND 16.72IN. DIA INSIDE AT BOTTOM
SPECIAL FEATURES
SHELL HAS TWO HINGED DOORS WITH LATCHES AND ONE SLIDING DOOR,3 RETAINERS OF EYE BOLTS AND WING NUTS ATTACHED TO LOOPS TO HOLD THE TOP SHELL AND A SUPPORT BRACKET (FOR FLOAT VALVE ASSEMBLY)
END ITEM IDENTIFICATION
4520-01-354-1191
NoPhoto