NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 11 results (0.05 seconds)
- 4310-00-075-5254 CONNECTING ROD,PISTONMore Info ...
- EDGE RADIUS
- 0.625 INCHES NOMINAL
- END HOLE INSIDE DIAMETER
- 0.688 INCHES NOMINAL
- BEARING REPLACEABILITY
- NONREPLACEABLE
- BODY WIDTH AT PISTON CONNECTING END
- 0.830 INCHES NOMINAL
- BODY WIDTH AT SHAFT CONNECTING END
- 0.970 INCHES NOMINAL
- 5310-00-018-0447 WASHER,LOCKMore Info ...
- 5365-00-264-0061 SHIMMore Info ...
- APERTURE DIAMETER
- 0.377 INCHES MINIMUM AND 0.379 INCHES MAXIMUM
- CONSTRUCTION
- ONE-PIECE
- HARDNESS RATING
- 48.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
- MATERIAL
- STEEL
- OUTSIDE DIAMETER
- 0.875 INCHES NOMINAL
- 5305-00-273-9360 SCREW,MACHINEMore Info ...
- THREAD SERIES DESIGNATOR
- UNS
- NOMINAL THREAD DIAMETER
- 0.375 INCHES
- THREAD QUANTITY PER INCH
- 12
- THREAD CLASS
- 2A
- THREAD DIRECTION
- RIGHT-HAND
- 5306-00-274-1917 BOLT,MACHINEMore Info ...
- DISTANCE FROM CENTERLINE TO FLAT
- 0.215 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
- DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER
- 2.062 INCHES NOMINAL FIRST HOLE
- FASTENER LENGTH
- 2.188 INCHES NOMINAL
- FEATURES PROVIDED
- FINISHED HEAD
- HARDNESS RATING
- 32.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL
- 4820-01-104-0613 VALVE,BALLMore Info ...
- 5998-15-122-1671 ELECTRONIC COMPONENTS ASSEMBLYMore Info ...
- 4320-01-118-1251 PUMP,ROTARYMore Info ...
- DRIVE CONNECTION TYPE
- GEAR
- DRIVE SHAFT END DIAMETER
- 0.874 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
- DRIVE SHAFT LENGTH
- 1.620 INCHES NOMINAL
- DRIVE SHAFT TYPE
- MACHINE KEYWAY
- END ITEM IDENTIFICATION
- DUAL PUMP UNIT 1890371 ABOARD 270 FT WMEC COAST GUARD VESSELS
- 5985-13-108-4329 ATTENUATOR,FIXEDMore Info ...
- 4130-00-212-6300 PIN,PISTONMore Info ...
