NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 434 results (0.04 seconds)
- 4820-01-141-7795 VALVE,SAFETY RELIEFMore Info ...
- ADJUSTABLE PRESSURE RANGE
- +58.0/+70.0 POUNDS PER SQUARE INCH
- BONNET TYPE
- INSIDE SPRING
- BONNET ATTACHMENT METHOD
- THREADED
- CONNECTION STYLE
- STREAMLINED WITH ONE BRAZING RING (TUBE) ERR-100
- CONNECTION TYPE
- UNTHREADED INTERNAL TUBE ALL ENDS
- 5305-00-468-0007 SETSCREWMore Info ...
- THREAD SERIES DESIGNATOR
- UNC
- NOMINAL THREAD DIAMETER
- 0.625 INCHES
- THREAD QUANTITY PER INCH
- 11
- THREAD CLASS
- 3A
- THREAD DIRECTION
- RIGHT-HAND
- 4820-00-287-8252 VALVE,BLEEDER,HYDRAULIC SYSTEMMore Info ...
- END ITEM IDENTIFICATION
- STRLR, CARGO, 3/4T, 2-WHL, TAM D08607; TRUCK, FORKLIFT, ROUGH TERRAIN, 6000 LB (5ID); CARGO SYSTEM, 463L; CHASSIS, TRLR, GP, 3 1/2T, 2-WHL, TAM D00807; TRACTOR, AIRCRAFT TOWING, MB-4; SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE)
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- SCREW, BLEEDER
- SPECIAL FEATURES
- STEEL,SPEC DATA,FED,NO. QQ-S-633,FS 1018 TO FS 1025 OR FSB1112 OR FSB 1113; ZINC-PLATED FINISH; DIM. DATA,1-17/64 IN. LG OVER-ALL,7/16 IN. ACROSS HEX FLATS,1/8 IN. LG HEX,7/8 IN. FROM VALVE END TO NEAREST HEX SHOULDER; BARBED TYPE HOSE CONNECTOR,BARBED TYPE DATA,9/64 IN. FROM HEX SHOULDER TO NEAREST EDGE OF BARBED HOSE CONNECTOR,0.308 IN. LARGEST DIA OF HOSE CONNECTOR,0.187 IN. SMALLEST DIA OF HOSE CONNECTOR,17/64 IN. LG HOSE CONNECTOR; VALVE SEAT END DATA,0.339 IN. LARGEST OD OF TAPER,1/8 IN. LG TAPER,9/32 IN. LG EXCLUDING THREADED PORTION,7/32 IN. FROM CENTER OF INLET HOLE TO VALVE END,3/32 IN. DIA INLET HOLE,EXTERNAL THD DATA,7/16 - 20,UNF,RH,CLASS 2A THD,0.509 IN. LG; DRAIN HOLE DATA,0.116 IN. DIA,11/32 IN. LG,1/8 IN. DIA,3/4 IN. LG
- 4730-99-215-4509 CLAMP,HOSEMore Info ...
- 5310-14-351-9767 PUSH ON NUTMore Info ...
- 5930-15-213-6507 INTERRUTTORE BIPOLAMore Info ...
- 3460-00-427-2024 SOCKET,TAPER SHANK TOOLMore Info ...
- 5120-01-430-8185 WRENCH,BOX AND OPEN END,COMBINATIONMore Info ...
- HEAD ANGLE
- 15.0 DEGREES NOMINAL
- MATERIAL
- STEEL OVERALL
- NONDEFINITIVE SPEC/STD DATA
- 2 TYPE AND 4 CLASS AND A STYLE
- OVERALL LENGTH
- 28.850 INCHES MINIMUM AND 29.350 INCHES MAXIMUM
- WRENCHING END OFFSET ANGLE
- 15.0 DEGREES NOMINAL
- 4820-01-142-0382 VALVE,SAFETY RELIEFMore Info ...
- ADJUSTABLE PRESSURE RANGE
- +166.0/+191.0 POUNDS PER SQUARE INCH
- BONNET ATTACHMENT METHOD
- BOLTED
- BONNET TYPE
- EXPOSED SPRING
- CONNECTION STYLE
- STREAMLINED WITH ONE BRAZING RING (TUBE) ERR-100
- CONNECTION TYPE
- UNTHREADED INTERNAL TUBE 1ST END
- 5315-00-689-6933 PIN,GROOVED,HEADEDMore Info ...
- DIAMETER
- 0.309 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
- FIRST END STYLE
- SQUARE
- HARDNESS RATING
- 40.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL
- HEAD STYLE
- FLAT
- HEIGHT
- 0.120 INCHES NOMINAL
