NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 96477 results (0.09 seconds)
- 4810-00-070-8436 PARTS KIT,PRESSURE REGULATING VALVEMore Info ...
- COMPONENT QUANTITY
- 41
- NONSUPPLY ITEMS AND QUANTITIES
- PLASTIC WASHER 5,RUBBER INSERT 2,BRASS SCREEN 1,PIN 1,RESTRICTOR 2,SPACER 2,O-RING 11,SPRING 3,STEEL BALL 2,BALL SEAT 2,CONE 1,JET 2,JPLASTIC SEAT 1,PLASTIC RING 4,RUBBER WASHER 1,DIAPHRAGM 1
- END ITEM IDENTIFICATION
- GRUMMAN AEROSPACE A-10 AIRCRAFT
- 5805-15-063-4450 GENERATORE 2280 HZMore Info ...
- 5340-00-988-8687 CLAMP,LOOPMore Info ...
- DISTANCE FROM LOOP CENTER TO TONGUE END
- 1.374 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
- 1.156 INCHES NOMINAL
- DIAMETER
- 0.204 INCHES NOMINAL
- MATERIAL DOCUMENT AND CLASSIFICATION
- MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
- MATERIAL THICKNESS
- 0.064 INCHES NOMINAL
- 5340-00-988-5922 CLAMP,LOOPMore Info ...
- DISTANCE FROM LOOP CENTER TO TONGUE END
- 0.998 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
- 0.780 INCHES NOMINAL
- DIAMETER
- 0.204 INCHES NOMINAL
- MATERIAL THICKNESS
- 0.050 INCHES NOMINAL
- MATERIAL
- ASBESTOS CUSHION AND PLASTIC CUSHION
- 2935-00-984-1682 LINER,OIL COOLER VAMore Info ...
- 4910-00-980-0198 CASE,GRINDING KITMore Info ...
- 5305-00-980-3247 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
- HEAD HEIGHT
- 0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM
- HEAD DIAMETER
- 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
- HEAD STYLE
- PAN NO. 2
- MINIMUM TENSILE STRENGTH
- 100000 POUNDS PER SQUARE INCH
- 4130-00-980-5728 VALVE,DISCHARGEMore Info ...
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- W/3/8 IN. FLARE DISCHARGE
- 5320-00-980-5659 RIVET,BLINDMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- EXPANSION DEVICE
- SERRATED STEM-TYPE W
- FASTENER LENGTH
- 0.276 INCHES MINIMUM AND 0.306 INCHES MAXIMUM
- GRIP LENGTH
- 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
- HARDNESS RATING
- 30.0 ROCKWELL C MINIMUM NUT AND 45.0 ROCKWELL C MAXIMUM NUT
- 5360-00-981-0169 SPRING,HELICAL,COMPRESSIONMore Info ...
