NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 101849 results (0.07 seconds)
- 4140-00-150-6174 FAN,CENTRIFUGALMore Info ...
- DRIVE TYPE
- DIRECT
- AIR FLOW RATE
- 150.0 CUBIC FEET PER MINUTE NOMINAL
- DISCHARGE DIRECTION
- HORIZONTAL
- HEIGHT
- 7.625 INCHES NOMINAL
- MATERIAL
- PLASTIC OVERALL
- 5950-00-387-0289 COIL,RADIO FREQUENCYMore Info ...
- TERMINAL TYPE AND QUANTITY
- 2 TAB, SOLDER LUG
- RATING METHOD
- WINDING TURNS SINGLE COMPONENT SINGLE WINDING
- TURN QUANTITY
- 42 SINGLE COMPONENT SINGLE WINDING
- WINDING CONDUCTOR SIZE
- 0.05082 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING
- COIL FORM TYPE
- HOLLOW SINGLE COMPONENT
- 5950-00-645-2824 TRANSFORMER,RADIO FREQUENCYMore Info ...
- ADJUSTMENT DEVICE DRIVE TYPE
- SHAFT SINGLE COMPONENT
- ADJUSTMENT METHOD AND QUANTITY
- 1 ADJUSTABLE CAPACITOR SINGLE COMPONENT
- BODY LENGTH
- 2.000 INCHES NOMINAL
- BODY OUTSIDE DIAMETER
- 1.125 INCHES NOMINAL
- COIL FORM TYPE
- HOLLOW SINGLE COMPONENT
- 5307-00-208-3845 STUD,PLAINMore Info ...
- HARDNESS RATING
- 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
- MATERIAL
- STEEL COMP 8640
- NOMINAL THREAD SIZE
- 0.250 INCHES NUT THREAD
- NOMINAL THREAD SIZE
- 0.250 INCHES STUD THREAD
- MATERIAL DOCUMENT AND CLASSIFICATION
- AMS A322 ASSN STD SINGLE MATERIAL RESPONSE OR AMS A331 ASSN STD SINGLE MATERIAL RESPONSE
- 5310-00-208-5297 NUT,PLAIN,HEXAGONMore Info ...
- BEARING SURFACE FINISH
- 125.0 MICROINCHES
- BEARING SURFACE TYPE
- CHAMFERED
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-A-225/3,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
- MATERIAL
- ALUMINUM ALLOY 2011 OVERALL
- NOMINAL THREAD SIZE
- 0.190 INCHES
- 5821-00-208-5410 SPEAKER ASSY,RADIOMore Info ...
- 4730-00-208-5665 CLAMP,HOSEMore Info ...
- 5305-00-208-5718 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.625 INCHES NOMINAL
- HARDNESS RATING
- 71.2 ROCKWELL B NOMINAL
- HEAD DIAMETER
- 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
- HEAD HEIGHT
- 0.124 INCHES MINIMUM AND 0.136 INCHES MAXIMUM
- HEAD STYLE
- ROUND
- 5306-00-208-5842 BOLT,ASSEMBLED WASHERMore Info ...
- FASTENER LENGTH
- 1.125 INCHES NOMINAL
- HEAD HEIGHT
- 0.234 INCHES NOMINAL
- HEAD STYLE
- HEXAGON
- MATERIAL
- STEEL COMP 1060 OVERALL
- NOMINAL THREAD DIAMETER
- 0.375 INCHES
- 5305-00-208-5157 SETSCREWMore Info ...
- FASTENER LENGTH
- 0.500 INCHES NOMINAL
- HEAD STYLE
- HEADLESS (SETSCREW)
- MATERIAL
- STEEL OVERALL
- NOMINAL THREAD DIAMETER
- 0.312 INCHES
- INTERNAL DRIVE STYLE
- HEXAGON
