NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 17 results (0.02 seconds)
- 6150-14-241-5241 CONDUCTEUR ELECTRIQMore Info ...
- 2530-00-119-4257 CYLINDER ASSEMBLY,ACTUATING,LINEARMore Info ...
- BODY MATERIAL
- BRASS
- BODY OUTSIDE DIAMETER
- 2.937 INCHES NOMINAL
- BORE DIAMETER
- 2.156 INCHES NOMINAL
- COMPRESSED LENGTH
- 6.375 INCHES NOMINAL
- DESIGN CHARACTERISTICS
- SINGLE ACTING SINGLE CYLINDER
- 5315-01-295-8806 PIN,SHOULDER,HEADLESSMore Info ...
- DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN
- 3.375 INCHES NOMINAL
- FIRST END STYLE
- CHAMFERED
- FIRST END LOCATION
- THREADED END
- FIRST HOLE DIAMETER
- 0.344 INCHES NOMINAL
- HOLE ARRANGEMENT STYLE
- ONE END DRILLED
- 5998-99-601-7343 CIRCUIT CARD ASSEMBLYMore Info ...
- 5315-01-294-6837 KEY,MACHINEMore Info ...
- DISTANCE FROM MOUNTING HOLE CENTER TO END
- 0.750 INCHES NOMINAL
- MATERIAL
- STEEL COMP 1026 OVERALL OR STEEL COMP 1029 OVERALL OR STEEL COMP 1030 OVERALL OR STEEL OVERALL
- MOUNTING HOLE DEPTH
- 0.312 INCHES NOMINAL
- MOUNTING HOLE DIAMETER
- 0.562 INCHES NOMINAL
- MOUNTING HOLE TYPE AND QUANTITY
- 2 PLAIN
- 5365-01-295-7609 SPACER,SLEEVEMore Info ...
- BODY INSIDE DIAMETER
- 5.0040 INCHES MINIMUM AND 5.0060 INCHES MAXIMUM
- BODY OUTSIDE DIAMETER
- 5.5470 INCHES MINIMUM AND 5.5500 INCHES MAXIMUM
- CORNER SHAPE
- SQUARE ALL CORNERS
- MATERIAL
- STEEL COMP 1026 OVERALL
- OVERALL LENGTH
- 2.7812 INCHES NOMINAL
- 5315-01-296-2102 PIN,SHOULDER,HEADLESSMore Info ...
- DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN
- 7.750 INCHES NOMINAL
- FIRST END STYLE
- CHAMFERED
- FIRST END LOCATION
- THREADED END
- FIRST HOLE DIAMETER
- 0.344 INCHES NOMINAL
- HOLE ARRANGEMENT STYLE
- ONE END DRILLED
- 3020-01-293-9382 PULLEY,GROOVEMore Info ...
- STYLE DESIGNATOR
- PLAIN
- OUTSIDE DIAMETER
- 29.000 INCHES NOMINAL
- OVERALL LENGTH
- 3.563 INCHES NOMINAL
- FACE WIDTH
- 3.000 INCHES NOMINAL
- HUB END OUTSIDE DIAMETER AND LOCATION
- 10.000 INCHES NOMINAL BOTH ENDS
- 3020-01-295-7179 PULLEY,GROOVEMore Info ...
- STYLE DESIGNATOR
- PLAIN
- OUTSIDE DIAMETER
- 26.250 INCHES NOMINAL
- FACE WIDTH
- 3.000 INCHES NOMINAL
- HUB END OUTSIDE DIAMETER AND LOCATION
- 6.500 INCHES NOMINAL BOTH ENDS
- DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION
- 2.500 INCHES NOMINAL BOTH ENDS
- 5365-01-295-7608 SPACER,SLEEVEMore Info ...
- BODY INSIDE DIAMETER
- 5.0040 INCHES MINIMUM AND 5.0060 INCHES MAXIMUM
- BODY OUTSIDE DIAMETER
- 5.5470 INCHES MINIMUM AND 5.5500 INCHES MAXIMUM
- CORNER SHAPE
- SQUARE ALL CORNERS
- MATERIAL
- STEEL COMP 1026 OVERALL
- OVERALL LENGTH
- 3.0938 INCHES NOMINAL
