NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 33 results (5.36 seconds)
- 6105-00-006-9803 BASE,MOTORMore Info ...
- 5320-01-502-4808 PIN-RIVET,THREADEDMore Info ...
- 5320-01-475-8198 PIN-RIVETMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 1.219 INCHES MINIMUM AND 1.279 INCHES MAXIMUM
- GRIP LENGTH
- 0.376 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
- HEAD MAJOR DIAMETER
- 0.386 INCHES MAXIMUM
- HEAD STYLE
- FLUSH COUNTERSUNK
- 5320-01-517-0616 PIN-RIVETMore Info ...
- END ITEM IDENTIFICATION
- FITTING,STRUCTURAL,VERTICAL
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- CRITICALITY CODE JUSTIFICATION
- AGAV
- FASTENER LENGTH
- 1.906 INCHES NOMINAL
- HEAD HEIGHT
- 0.078 INCHES NOMINAL
- 5340-01-517-0664 FASTENER,FLARE LOCKMore Info ...
- COUNTERSINK ANGLE
- 100.0 DEGREES NOMINAL
- HEAD HEIGHT
- 0.104 INCHES NOMINAL
- HEAD DIAMETER
- 0.431 INCHES NOMINAL
- HEAD STYLE
- DISHED COUNTERSUNK
- HOLE SIZE FOR WHICH DESIGNED
- 0.264 INCHES NOMINAL
- 5320-01-475-8640 COLLAR,GROOVED PIN-RIVETMore Info ...
- COLLAR INSIDE DIAMETER
- 0.164 INCHES MAXIMUM
- COLLAR OUTSIDE DIAMETER
- 0.200 INCHES MAXIMUM
- COLLAR OVERALL HEIGHT
- 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
- COLLAR STYLE
- STRAIGHT TYPE
- MATERIAL DOCUMENT AND CLASSIFICATION
- MIL-T-9046 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-T-9047 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
- 5320-01-517-1454 PIN-RIVETMore Info ...
- CRITICALITY CODE JUSTIFICATION
- AGAV
- END ITEM IDENTIFICATION
- FA-18E/F VERT. STAB. STRUC. ASSEMBLY
- 5320-01-517-0668 PIN-RIVETMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 1.343 INCHES MINIMUM AND 1.403 INCHES MAXIMUM
- HEAD HEIGHT
- 0.031 INCHES MAXIMUM
- HEAD MAJOR DIAMETER
- 0.388 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK UNDERCUT
- 5320-01-517-0694 PIN-RIVETMore Info ...
- END ITEM IDENTIFICATION
- AIRCRAFT
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- COUNTERSINK HEIGHT
- 0.078 INCHES MAXIMUM
- CRITICALITY CODE JUSTIFICATION
- AGAV
- FASTENER LENGTH
- 1.969 INCHES NOMINAL
- 5320-01-517-2316 PIN-RIVETMore Info ...
- END ITEM IDENTIFICATION
- FITTING,STRUCTURAL - F/A-18E,F VERTICAL STAB
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- CRITICALITY CODE JUSTIFICATION
- AGAV
- FASTENER LENGTH
- 2.781 INCHES NOMINAL
- HEAD MAJOR DIAMETER
- 0.386 INCHES NOMINAL
