NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 6124 results (0.03 seconds)
- 6145-01-089-2645 WIRE,ELECTRICALMore Info ...
- 5305-01-060-7671 SCREW,CAP,SOCKET HEADMore Info ...
- FASTENER LENGTH
- 4.969 INCHES MINIMUM AND 5.000 INCHES MAXIMUM
- HEAD DIAMETER
- 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
- HEAD HEIGHT
- 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
- HEAD STYLE
- PAN
- MATERIAL
- STEEL CORROSION RESISTING OVERALL
- 3020-00-219-2972 GEAR,HELICALMore Info ...
- MATERIAL
- STEEL COMP 2340 OVERALL
- MATERIAL DOCUMENT AND CLASSIFICATION
- SAE 2340 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
- TEETH QUANTITY
- 72
- TEETH TYPE
- SINGLE HELIX
- TOOTH FORM
- STANDARD
- 2815-00-353-9017 DISK ASSEMBLYMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- STEEL; RAISED FACE FLANGED 4.885 IN. OD 0.567 IN. THK; FACE 0.057 IN,H 3.380 IN. OD; CONVEX TAPERED SLOT 1.368 IN. TO 1.025 IN.; BORED 2.250 IN. DIA 0.272 IN. DEEP; HUB ONE SIED 2.745 IN. OD 1.735 IN. LG; 2 KEYWAY 180 DEG APART 0.455 IN. W X 0.225 IN. DEEP X 2.100 IN. LG; W/ONE EXPANSION PLUG 2.250 IN. DIA
- 5306-01-440-6838 BOLT,SHOULDERMore Info ...
- FASTENER LENGTH
- 2.816 INCHES MINIMUM AND 2.856 INCHES MAXIMUM
- HEAD HEIGHT
- 0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM
- HEAD STYLE
- HEXAGON
- MATERIAL
- IRON ALLOY 660 OVERALL
- MINIMUM YIELD STRENGTH
- 95000 POUNDS PER SQUARE INCH
- 5305-01-530-9340 SCREW,MACHINEMore Info ...
- END ITEM IDENTIFICATION
- C-17A ACFT
- FASTENER LENGTH
- 0.750 INCHES NOMINAL
- HEAD HEIGHT
- 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
- HEAD STYLE
- HEXAGON
- NOMINAL THREAD DIAMETER
- 0.190 INCHES
- 5320-01-535-3246 PIN-RIVETMore Info ...
- FASTENER LENGTH
- 0.878 INCHES MINIMUM AND 0.898 INCHES MAXIMUM
- GRIP LENGTH
- 0.558 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
- HEAD HEIGHT
- 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM
- HEAD MAJOR DIAMETER
- 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
- HEAD STYLE
- STRAIGHT PAN
- 5320-01-535-3247 PIN-RIVETMore Info ...
- END ITEM IDENTIFICATION
- C-17A AIRCRAFT
- COUNTERSINK ANGLE
- 100.0 DEGREES NOMINAL
- FASTENER LENGTH
- 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
- GRIP LENGTH
- 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
- HEAD HEIGHT
- 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM
- 5320-01-544-0411 PIN-RIVETMore Info ...
- END ITEM IDENTIFICATION
- C-17A AIRCRAFT
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- PIN-RIVET
- 5320-01-615-2030 PIN-RIVETMore Info ...
- END ITEM IDENTIFICATION
- C-17 AIRCRAFT
- COUNTERSINK ANGLE
- 100.0 DEGREES NOMINAL
- FASTENER LENGTH
- 0.5750 INCHES NOMINAL
- GRIP LENGTH
- 0.250 INCHES NOMINAL
- HEAD HEIGHT
- 0.0449 INCHES MINIMUM AND 0.0470 INCHES MAXIMUM
