NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 5 results (0.05 seconds)
- 3010-00-385-8935 COUPLING,SHAFT,FLEXIBLEMore Info ...
- 5340-01-523-8482 BRACKET,MOUNTINGMore Info ...
- END ITEM IDENTIFICATION
- STRYKER FOV
- MATERIAL
- ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086
- MOUNTING HOLE TYPE
- PLAIN
- MOUNTING HOLE QUANTITY
- 6
- MATERIAL DOCUMENT AND CLASSIFICATION
- H321, AMS-QQ-A-250/6 OR ASTM B209. .250 THK ASSN STD 1ST MATERIAL RESPONSE OR H32. AMS-QQ-A-250/7 ASSN STD 2ND MATERIAL RESPONSE OR H32 OR H116, ASTM B209. .250 THK ASSN STD 2ND MATERIAL RESPONSE
- 6220-01-523-8805 BRACKET,LIGHT RETENTIONMore Info ...
- MATERIAL
- ALUMINUM ALLOY
- SPECIAL FEATURES
- FINISH PER PARAGRAPH 2.4, EXTERIOR PAINT SYSTEM DWG 19207-12350824, EXCEPT HEXAVALENT CHROMIUM PROCESS SHALL NOT BE USED. MATT ALUMINUM 5083-H321, SPEC AMS-QQ-A-250/6 OR ASTM B 209, .375 THK. OPTIONAL MATT ALUMINUM 5086-H32, SPEC AMS-QQ-250/7 OR ALUMINUM 5086-H32 OR H116, SPEC ASTM B 209, .375 THK. ALUMINUM WELDING IAW DWG 19207-12472301 SECTION 8, WELD FILLER METAL TO BE TYPE 5236, SPEC ANSI/AWS A5.10
- END ITEM IDENTIFICATION
- STRYKER FOV
- 5340-01-523-8379 BRACKET,MOUNTINGMore Info ...
- MATERIAL
- STEEL COMP 4130 OR STEEL COMP 8630
- MOUNTING HOLE TYPE
- PLAIN
- MOUNTING HOLE QUANTITY
- 4
- MATERIAL DOCUMENT AND CLASSIFICATION
- ASTM A829. .375 THK ASSN STD ALL MATERIAL RESPONSES AND ASTM A322 OR A331. 1.125 DIA ASSN STD ALL MATERIAL RESPONSES
- OVERALL HEIGHT
- 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM
- 6220-01-523-9256 BRACKET,LIGHT RETENTIONMore Info ...
- INSIDE HEIGHT
- 0.196 INCHES NOMINAL
- MATERIAL
- ALUMINUM ALLOY
- SPECIAL FEATURES
- FINISH PER PARAGRAPH 2.4, EXTERIOR PAINT SYSTEM DWG 19207-12350824, EXCEPT HEXAVALENT CHROMIUM PROCESS SHALL NOT BE USED. MATT ALUMINUM 5083-H321, SPEC AMS-QQ-A-250/6 OR ASTM B 209, .375 THK. OPTIONAL MATT ALUMINUM 5086-H32, SPEC AMS-QQ-250/7 OR ALUMINUM 5086-H32 OR H116, SPEC ASTMB 209, .375 THK. ALUMINUM WELDING IAW DWG 19207-12472301 SECTION 8, WELD FILLER METAL TO BE TYPE 5236, SPEC ANSI/AWS A5.10
- END ITEM IDENTIFICATION
- STRYKER FOV
