NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 109 results (0.02 seconds)
- 5315-00-054-4166 PIN,STRAIGHT,HEADLESSMore Info ...
- FIRST END STYLE
- CHAMFERED
- FIRST END TAPER ANGLE
- 25.0 DEGREES NOMINAL
- FIRST END TAPER LENGTH
- 0.016 INCHES NOMINAL
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-S-763,TYPE A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
- MATERIAL
- STEEL COMP 303 OVERALL
- 5330-01-396-8052 GASKETMore Info ...
- 5330-01-381-9812 RETAINER,PACKINGMore Info ...
- 5330-01-192-0380 RETAINER,PACKINGMore Info ...
- 5935-00-246-1673 CONNECTOR,RECEPTACLE,ELECTRICALMore Info ...
- DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE
- 0.625 INCHES NOMINAL
- BUSHING DIAMETER
- 0.442 INCHES MINIMUM AND 0.452 INCHES MAXIMUM
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT
- 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
- CONNECTOR LOCKING METHOD
- BAYONET PIN
- CONTACT MATERIAL
- COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
- 5330-27-011-4341 SEAL,PLAINMore Info ...
- 3455-00-194-0552 CUTTER,MILLING,SIDEMore Info ...
- FACE WIDTH
- 0.438 INCHES NOMINAL
- MATERIAL
- STEEL
- MOUNTING HOLE DIAMETER
- 1.000 INCHES NOMINAL
- OUTSIDE DIAMETER
- 3.000 INCHES NOMINAL
- SPECIFICATION/STANDARD DATA
- 80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
- 4820-99-560-5515 VALVE,BUTTERFLYMore Info ...
- 5985-00-872-6791 WAVEGUIDE ASSEMBLYMore Info ...
- STYLE DESIGNATOR
- OFFSET BEND TYPE
- WAVEGUIDE CENTER TO CENTER DISTANCE
- 3.000 INCHES NOMINAL
- CROSS-SECTIONAL SHAPE STYLE
- INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
- WAVEGUIDE OUTSIDE WIDTH
- 0.702 INCHES NOMINAL
- WAVEGUIDE INSIDE WIDTH
- 0.622 INCHES NOMINAL
- 3040-00-590-6148 CLAMP,HUBMore Info ...
- DISTANCE FROM BORE CENTERLINE TO END
- 0.325 INCHES NOMINAL
- BORE DIAMETER
- 0.2508 INCHES NOMINAL
- MATERIAL
- STEEL
- OVERALL LENGTH
- 0.710 INCHES NOMINAL
- OVERALL WIDTH
- 0.375 INCHES NOMINAL
