NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 1005393 results (0.12 seconds)
- 5821-14-365-4620 RECEIVER-TRANSMITTER,RADIOMore Info ...
- 6630-01-426-4333 TURBIDIMETERMore Info ...
- SPECIAL FEATURES
- TURBIDITY RANGE: 0 TO 1000 NTU; PRE-PROGRAMMED CALIBRATION PROCEDURE; ELECTRONIC ZEROING; DIGITAL READOUT; INCLUDES 6 SAMPLE CELLS, 4 SEALED VIALS OF STABILCAL PRIMARY TURBIDITY STANDARDS (LESS THAN 0.1, 20, 100, AND 800 NTU), SECONDARY GELEX TURBIDITY STANDARDS, SILICONE OIL, AND OILING CLOTH
- END ITEM IDENTIFICATION
- 6630-01-545-0032 WATER QUALITY ANALYSIS SET
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- TURBIDIMETER PORTABLE
- 6840-01-065-3662 DISINFECTANT,GENERAL PURPOSEMore Info ...
- SPECIAL FEATURES
- 19 OZ
- PHYSICAL FORM
- AEROSOL
- TEST ORGANISM TYPE
- PSEUDOMONAS AERUGINOSA AND SALMONELLA CHOLERAESUIS AND STAPHYLOCOCCUS AUREUS
- 7510-15-182-8660 TONER CANON 4650More Info ...
- 5330-15-108-0146 GASKET OR 4650-NB 7More Info ...
- 5305-00-042-1209 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.875 INCHES NOMINAL
- HEAD DIAMETER
- 0.348 INCHES MINIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- NOMINAL THREAD DIAMETER
- 0.190 INCHES
- 5305-00-022-0638 SCREW,CAP,HEXAGON HEADMore Info ...
- DEPARTURE FROM CITED DOCUMENT
- AS MODIFIED BY HOLE TYPE AND QUANTITY
- FASTENER LENGTH
- 1.500 INCHES NOMINAL
- HARDNESS RATING
- 100.0 ROCKWELL B MAXIMUM OVERALL
- HEAD HEIGHT
- 0.312 INCHES NOMINAL
- HEAD STYLE
- HEXAGON
- 5305-00-022-5593 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.875 INCHES NOMINAL
- HEAD DIAMETER
- 0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM
- HEAD HEIGHT
- 0.194 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
- HEAD STYLE
- FILLISTER
- NOMINAL THREAD DIAMETER
- 0.312 INCHES
- 5305-00-017-9881 SCREW,CAP,HEXAGON HEADMore Info ...
- 2530-00-026-4617 AXLE,VEHICULAR,NONDRIVINGMore Info ...
- AXLE CONSTRUCTION
- TUBULAR
- DISTANCE BETWEEN SPRING SEAT CENTERS
- 31.750 INCHES NOMINAL
- FURNISHED AXLE COMPONENTS
- SPINDLE
- DESIGN TYPE
- RIGID SPINDLE
- SPECIAL FEATURES
- LENGTH O/A 49.563 IN.;DESIGN FORM:STRAIGHT;LARGEST WHEEL BEARING SURFACE DIA:0.750 IN.;SPINDLE EFFECTIVE LG:5.969
