NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 7294806 results (0.58 seconds)
- 6515-01-472-8196 ANESTHESIA SET,SPINALMore Info ...
- NONSUPPLY ITEMS AND QUANTITIES
- PREP SPONGE, 1; GUAZE SPONGES; TOWELS; REMOVABLE ANTISEPTIC CUP WITH ISLAND, 1; FENESTRATED DRAPE, 1; 5 MICRON PROCEDURAL FILTER, 1; 2ML TETRACAINE HYDROCHLORIDE 1 PERCENT, 1; 5ML DEXTROSE 10%, 1; 1ML EPINEPHRINE (1 MG/ML), 1; 2ML PROCAINE 1%, 1; 1ML EPHEDRINE SULFATE (50 MG/ML), 1; 22 GAUGE, 3-1/2 INCH QUINCKE SPINAL NEEDLE, 1; 5ML GLASS SYRINGE, LS, PREASSEMBLED WITH 20 GAUGE, 1-1/2 INCH WITHDRAWAL NEEDLE, 1; 3ML PLASTIC SYRINGE, LS, PREASSEMBLED WITH 25 GAUGE, 5/8 INCH WHEAL NEEDLE, 1; 30ML POVIDONE IODINE, 1
- STERILITY
- STERILE
- DISPOSITION AFTER INITIAL USE
- DISPOSABLE
- SPECIAL FEATURES
- SPINAL 22-G QUINCKE
- UNIT PACKAGE QUANTITY
- 10
- 5970-01-498-4236 INSULATOR,STANDOFFMore Info ...
- STYLE DESIGNATOR
- PILLAR
- SHANK LENGTH
- 0.531 INCHES NOMINAL
- OUTSIDE DIAMETER
- 0.188 INCHES NOMINAL
- OVERALL HEIGHT
- 0.969 INCHES NOMINAL
- MATERIAL AND LOCATION
- OVERALL STEEL, CORROSION RESISTING
- 5935-15-230-9158 SPINA 2P+T 32AMore Info ...
- 5340-00-395-3741 POST,ELECTRICAL-MECHANICAL EQUIPMENTMore Info ...
- DISTANCE FROM END TO HOLE CENTER
- 0.190 INCHES NOMINAL
- CROSS-SECTIONAL SHAPE
- ROUND
- DIAMETER
- 0.188 INCHES NOMINAL
- GROOVE DIAMETER
- 0.0635 INCHES NOMINAL
- GROOVE WIDTH
- 0.0267 INCHES NOMINAL
- 5895-01-177-5132 SRC1000-01PLATE MTGMore Info ...
- 5962-01-243-4335 MICROCIRCUIT,DIGITALMore Info ...
- BODY HEIGHT
- 0.180 INCHES NOMINAL
- BODY LENGTH
- 0.930 INCHES MINIMUM AND 0.975 INCHES MAXIMUM
- BODY WIDTH
- 0.245 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
- DESIGN FUNCTION AND QUANTITY
- 8 BUFFER AND 1 DRIVER, LINE
- FEATURES PROVIDED
- HIGH SPEED AND 3-STATE OUTPUT AND HIGH CURRENT AND HIGH IMPEDANCE
- 5962-01-244-4816 MICROCIRCUIT,LINEARMore Info ...
- BODY HEIGHT
- 0.180 INCHES MAXIMUM
- BODY LENGTH
- 0.400 INCHES MAXIMUM
- BODY WIDTH
- 0.250 INCHES NOMINAL
- DESIGN FUNCTION AND QUANTITY
- 1 AMPLIFIER, OPERATIONAL, GENERAL PURPOSE
- FEATURES PROVIDED
- LOW NOISE AND W/SHORT CIRCUIT PROTECTION AND W/COMMON MODE AND FREQUENCY COMPENSATED AND INTERNALLY COMPENSATED
- 5962-01-248-0240 MICROCIRCUIT,DIGITALMore Info ...
- BODY HEIGHT
- 0.140 INCHES MAXIMUM
- BODY LENGTH
- 0.896 INCHES MAXIMUM
- BODY WIDTH
- 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
- FEATURES PROVIDED
- BURN IN
- INCLOSURE MATERIAL
- PLASTIC
- 5962-01-127-5687 MICROCIRCUIT,DIGITALMore Info ...
- BODY HEIGHT
- 0.200 INCHES MAXIMUM
- BODY LENGTH
- 0.755 INCHES MINIMUM AND 0.785 INCHES MAXIMUM
- BODY WIDTH
- 0.280 INCHES MAXIMUM
- DESIGN FUNCTION AND QUANTITY
- 6 DRIVER, BUS
- FEATURES PROVIDED
- HERMETICALLY SEALED AND MONOLITHIC AND 3-STATE OUTPUT
- 5905-01-131-7419 RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISIONMore Info ...
- SECTION QUANTITY
- 1
- RELIABILITY INDICATOR
- NOT ESTABLISHED
