NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 20 results (1.90 seconds)
- 4910-00-241-3329 STAND,MAINTENANCE,AUTOMOTIVE AXLEMore Info ...
- FLOOR STOPS
- NOT INCLUDED
- MOUNTING TYPE
- WHEEL
- OVERALL HEIGHT
- 37.000 INCHES NOMINAL
- OVERALL LENGTH
- 30.000 INCHES MINIMUM AND 60.000 INCHES MAXIMUM
- OVERALL WIDTH
- 36.000 INCHES NOMINAL
- 5310-01-081-0470 WASHER,FLATMore Info ...
- CENTER HOLE SHAPE STYLE
- ROUND
- CROSS-SECTIONAL SHAPE STYLE
- RECTANGULAR
- HOLE DIAMETER
- 0.170 INCHES MINIMUM AND 0.173 INCHES MAXIMUM
- OVERALL DIAMETER
- 0.281 INCHES NOMINAL
- PERIPHERAL SHAPE STYLE
- ROUND
- 5330-01-085-7689 SEAL,PLAIN ENCASEDMore Info ...
- CASE STYLE
- SQUARE
- HOUSING BORE DIAMETER
- 2.220 INCHES NOMINAL
- MATERIAL
- PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) SEALING ELEMENT A
- MATERIAL
- PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) SEALING ELEMENT B
- SEAL WIDTH
- 0.470 INCHES NOMINAL
- 5977-00-928-6147 BRUSH,ELECTRICAL CONTACTMore Info ...
- BODY STYLE
- CYLINDRICAL
- BRUSH SHUNT LENGTH
- 1.500 INCHES NOMINAL SINGLE SHUNT
- CONTACT FACE STYLE
- FLAT
- DIAMETER
- 0.312 INCHES NOMINAL
- MATERIAL DOCUMENT AND CLASSIFICATION
- MORGANITE CARBON GRADE CM-5H MFR REF SINGLE MATERIAL RESPONSE
- 5305-01-080-9109 SCREW,CAP,SOCKET HEADMore Info ...
- FASTENER LENGTH
- 5.407 INCHES MINIMUM AND 5.469 INCHES MAXIMUM
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM OVERALL AND 46.0 ROCKWELL C MAXIMUM OVERALL
- HEAD HEIGHT
- 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
- HEAD DIAMETER
- 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
- HEAD STYLE
- KNURLED NO. 4
- 5895-01-677-1064 CONVERTER,SIGNAL DATAMore Info ...
- 2530-01-152-3104 FLANGE,MOUNTING,STEERING GEARMore Info ...
- 2920-00-116-9497 END BELL,ELECTRICAL ROTATING EQUIPMENTMore Info ...
- 5310-01-081-0469 WASHERMore Info ...
- 2920-00-228-3402 END BELL,ELECTRICAL ROTATING EQUIPMENTMore Info ...
