NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 221 results (0.03 seconds)
- 5310-15-042-0048 NUT,PLAIN,HEXAGONMore Info ...
- 8430-22-122-9141 CLOGSMore Info ...
- 4720-00-477-5802 HOSE ASSEMBLY,METALLICMore Info ...
- HYDROSTATIC TEST PRESSURE
- 4000.0 POUNDS PER SQUARE INCH
- LAYER COMPOSITION AND LOCATION
- 1ST LAYER BRAIDED NICKEL COPPER ALLOY WIRE
- LAYER COMPOSITION AND LOCATION
- 2ND LAYER BRAIDED NICKEL COPPER ALLOY WIRE
- LAYER COMPOSITION AND LOCATION
- 3RD LAYER BRAIDED NICKEL COPPER ALLOY WIRE
- LAYER COMPOSITION AND LOCATION
- OUTER LAYER CORRUGATED COPPER
- 1650-00-580-0188 DAMPENER,FLUID PRESSUREMore Info ...
- CONNECTION QUANTITY
- 2
- FLUID TYPE FOR WHICH DESIGNED
- AIR
- MATERIAL
- ALUMINUM ALLOY
- OPERATING PRESSURE RANGE
- +4500.0 TO 7500.0 POUNDS PER SQUARE INCH
- FSC APPLICATION DATA
- TUBING INSTALLATION,HYDRAULIC SYSTEM AIRCRAFT
- 2910-00-730-8377 FILTER,FLUIDMore Info ...
- STYLE DESIGNATOR
- TEE TYPE (HYDRAULIC)
- BODY LENGTH
- 3.125 INCHES NOMINAL
- BODY HEIGHT
- 6.000 INCHES NOMINAL
- MATERIAL
- ALUMINUM BODY
- MATERIAL
- CELLULOSE FILTERING MEDIUM
- 4930-01-561-5968 CANNISTERMore Info ...
- SPECIAL FEATURES
- 4.500 OUTSIDE DIAMETER; 4.000 IN.INSIDE DIAMETER; 43.000 IN. LONG
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- FILTER CANNISTER SEPERATOR
- 5360-21-809-4052 SPRING,HELICAL,TORSIONMore Info ...
- 5950-01-349-0170 COIL,RADIO FREQUENCYMore Info ...
- TERMINAL TYPE AND QUANTITY
- 2 PIN
- RATING METHOD
- ELECTRICAL SINGLE COMPONENT SINGLE WINDING
- WINDING OPERATING CURRENT
- 1.0 AMPERES DC NOMINAL SINGLE COMPONENT SINGLE WINDING
- DC RESISTANCE RATING IN OHMS
- 0.050 SINGLE COMPONENT SINGLE WINDING
- INDUCTANCE RATING
- 4.25 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
- 6660-01-483-2039 DETECTOR,WIND DIRECTION AND SPEEDMore Info ...
- WIND SPEED ROTOR MATERIAL
- STEEL, STAINLESS
- SPECIAL FEATURES
- ULTRASONIC;FULLY COMPENSATED OVER TEMPERATURE,HUMIDITY AND ALTITUDE;MATERIAL SENSOR ARMS:316 STAINLESS STEEL;SENSOR BODY:6061-T6 ANODIZED ALUMINUM;TRANSDUCER HEADS:SILICONE RUBBER AND PVC PLASTIC; FUNCTION: WIND SPEED AND DIRECTION SENSOR; REFERENCE DATA: TI 6560.70, TABLE8-1, PG 8-1
- END ITEM IDENTIFICATION
- STAND ALONE WEATHER SYSTEM (SAWS)
- 6660-01-198-3179 GRILLE,FINGERMore Info ...
