NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 1452 results (0.08 seconds)
- 5307-14-226-0823 STUD,PLAINMore Info ...
- 5845-00-126-9625 SENSING UNIT,SONARMore Info ...
- 5133-01-371-9994 DRILL,TWISTMore Info ...
- 5995-00-501-6435 LEAD,ELECTRICALMore Info ...
- CONDUCTOR FORM
- STRANDED SINGLE CONDUCTOR
- CROSS SECTION OUTSIDE DIAMETER
- 0.530 INCHES NOMINAL
- CROSS-SECTIONAL SHAPE STYLE
- ROUND
- MATERIAL
- STEEL CORROSION RESISTING CORE CONDUCTOR SINGLE CONDUCTOR
- LEAD OVERALL LENGTH
- 4.360 INCHES NOMINAL
- 5306-01-418-5751 BOLT,SHEARMore Info ...
- DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER
- 0.659 INCHES NOMINAL FIRST HOLE
- FASTENER LENGTH
- 0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM
- GRIP DIAMETER
- 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
- GRIP LENGTH
- 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
- HEAD HEIGHT
- 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
- 5305-01-184-7699 SCREW,CLOSE TOLERANCEMore Info ...
- DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER
- 1.635 INCHES MINIMUM FIRST HOLE AND 1.655 INCHES MAXIMUM FIRST HOLE
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 1.730 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
- GRIP DIAMETER
- 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
- GRIP LENGTH
- 1.312 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
- 5320-01-154-4350 PIN-RIVETMore Info ...
- 5320-00-101-5566 PIN-RIVETMore Info ...
- COUNTERSINK ANGLE
- 100.0 DEGREES NOMINAL
- FASTENER LENGTH
- 1.1875 INCHES MINIMUM AND 1.2075 INCHES MAXIMUM
- GRIP LENGTH
- 0.6875 INCHES MINIMUM AND 0.6975 INCHES MAXIMUM
- HEAD MAJOR DIAMETER
- 0.4689 INCHES MINIMUM AND 0.4739 INCHES MAXIMUM
- HEAD STYLE
- FLUSH COUNTERSUNK
- 5320-01-333-0069 PIN-RIVETMore Info ...
- FASTENER LENGTH
- 1.968 INCHES MAXIMUM
- GRIP LENGTH
- 1.688 INCHES MAXIMUM
- HEAD HEIGHT
- 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
- HEAD MAJOR DIAMETER
- 0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
- HEAD STYLE
- ERR-090
- 5305-01-190-2188 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.526 INCHES MINIMUM AND 0.541 INCHES MAXIMUM
- HEAD DIAMETER
- 0.308 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
- HEAD HEIGHT
- 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
- HEAD STYLE
- PAN NO. 2
- MINIMUM TENSILE STRENGTH
- 160000 POUNDS PER SQUARE INCH
