NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 62 results (1.00 seconds)
- 6515-25-723-6777 SCISSORS,NASALMore Info ...
- 4920-00-011-0090 TEST SET,CONTROLMore Info ...
- 5365-01-618-1587 SHIMMore Info ...
- BOLT HOLE QUANTITY
- 3
- CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
- 3.750 INCHES NOMINAL
- HOLE DIAMETER
- 0.530 INCHES NOMINAL
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-N-281 FED SPEC 1ST MATERIAL RESPONSE
- MATERIAL
- NICKEL AND COPPER
- 5365-01-618-3530 SHIMMore Info ...
- BOLT HOLE DIAMETER
- 0.530 INCHES NOMINAL
- BOLT HOLE QUANTITY
- 3
- CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
- 3.750 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
- 1.120 INCHES NOMINAL
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-N-281,CLASS A FED SPEC 1ST MATERIAL RESPONSE
- 5340-01-617-7824 BRACKET,MOUNTINGMore Info ...
- 5985-01-366-6928 MASTMore Info ...
- END ITEM IDENTIFICATION
- AN/BPS-15 SSN 751 MAST MOD
- CRITICALITY CODE JUSTIFICATION
- ZZZY
- MAST CONSTRUCTION
- SECTIONALIZED
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- QUALITY CONTROL IN ACCORDANCE WITH NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS
- 5985-01-350-8714 WAVEGUIDEMore Info ...
- END ITEM IDENTIFICATION
- SSN 751 MAST
- 5365-01-618-1262 SHIMMore Info ...
- BOLT HOLE QUANTITY
- 3
- CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
- 3.750 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
- 1.120 INCHES NOMINAL
- HOLE DIAMETER
- 0.530 INCHES NOMINAL
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-N-281 FED SPEC 1ST MATERIAL RESPONSE
- 2040-01-389-9200 CHANNEL,BUMPERMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- MATERIAL STEEL; 6" WIDE; 27-1/2" LENGTH
- END ITEM IDENTIFICATION
- HULL
- 5998-01-109-1610 CIRCUIT CARD ASSEMBLYMore Info ...
- END ITEM IDENTIFICATION
- CIRCUIT CARD ASSEMBLY
- OVERALL LENGTH
- 10.500 INCHES NOMINAL
- OVERALL WIDTH
- 9.250 INCHES NOMINAL
- SPECIAL FEATURES
- CAPACITOR 22,DIODE 15,MICROCIRCUIT 2,PRINTED WIRING BOARD 1,RELAY 1,RESISTOR 70,TRANSISTOR 14; MOUNTING CONFIGURATION:PLUG-IN
