NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 591 results (0.03 seconds)
- 5955-00-060-0732 CRYSTAL UNIT,QUARTZMore Info ...
- DRIVE LEVEL RATING
- 5.0 MILLIWATTS NOMINAL
- BODY THICKNESS
- 0.194 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
- BODY WIDTH
- 0.545 INCHES MAXIMUM
- CENTER TO CENTER DISTANCE BETWEEN TERMINALS
- 0.267 INCHES MINIMUM AND 0.283 NOMINAL CENTIMETERS
- CIRCUIT RESONANCE
- SERIES RESONANCE
- 4730-00-278-9202 CLAMP,HOSEMore Info ...
- FASTENING DEVICE TYPE
- THUMB HEAD SCREW
- MATERIAL
- STEEL CORROSION RESISTING OVERALL
- INSIDE DIAMETER
- 1.078 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
- OVERALL WIDTH
- 0.500 INCHES MINIMUM AND 0.594 INCHES MAXIMUM
- SPECIFICATION/STANDARD DATA
- 88044-AN757 GOVERNMENT STANDARD
- 5325-01-599-9826 STUD ASSEMBLY,TURNLOCK FASTENERMore Info ...
- END ITEM IDENTIFICATION
- C-17A ACFT
- 5961-01-332-9503 TRANSISTORMore Info ...
- CURRENT RATING PER CHARACTERISTIC
- 800.00 MILLIAMPERES SOURCE CUTOFF CURRENT MAXIMUM
- MAXIMUM OPERATING TEMP PER MEASUREMENT POINT
- 150.0 DEG CELSIUS JUNCTION
- MOUNTING METHOD
- COMPRESSION
- SEMICONDUCTOR MATERIAL
- SILICON
- INCLOSURE MATERIAL
- PLASTIC
- 6110-01-472-6944 CONTACTOR,MAGNETICMore Info ...
- AC VOLTAGE RATING
- 120.0 VOLTS NOMINAL
- AMP SIZE RATING
- 60.0
- ACTUATION METHOD
- MAGNETIC
- PERFORMANCE TYPE
- AUTOMATIC
- OVERALL WIDTH
- 5.625 INCHES NOMINAL
- 5340-01-645-2702 CLAMP,LOOPMore Info ...
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- CLAMP, RECTANGULAR
- 5342-01-650-2134 CLAMP,LOOPMore Info ...
- 5342-01-650-2147 CLAMP,LOOPMore Info ...
- 5340-01-524-1082 CLAMP,AIRCRAFT,MATEMore Info ...
- DISTANCE FROM LOOP CENTER TO TONGUE END
- 1.409 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
- 1.191 INCHES NOMINAL
- CRITICALITY CODE JUSTIFICATION
- AGAV
- DIAMETER
- 0.209 INCHES NOMINAL
- END ITEM IDENTIFICATION
- V-22
- 5340-01-524-0866 CLAMP,AIRCRAFT,MATEMore Info ...
- DISTANCE FROM LOOP CENTER TO TONGUE END
- 0.816 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
- 0.598 INCHES NOMINAL
- CRITICALITY CODE JUSTIFICATION
- AGAV
- DIAMETER
- 0.209 INCHES NOMINAL
- END ITEM IDENTIFICATION
- V-22
