NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 98882 results (0.06 seconds)
- 5180-00-152-9257 TOOL KIT,MODULE REPAIRMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- CONSISTS OF 1 SX-20 SOLDER EXTRACTION SYSTEM,1 PM-166 MINIATURE MACHINING SYSTEM,1 LS15 LAP REFLOW SOLDERING SYSTEM,1 VT100 VACUUM CLEANING AND HANDLING SYSTEM,1 TW15 RESISTANCE TWEEZER HEATING SYSTEM,1 TS15 THERMAL STRIP SYSTEM,1 CT15 CONDUCTIVE TWEEZER HEATING SYSTEM,1 T-450 SPECIAL AIDS CONSISTING OF 1 PRO VISE,1 HOT CUBBY SYSTEM WITH CLEANING UNIT,1 CONFORM 1 UNIT
- 5365-00-270-2088 SPACER,RINGMore Info ...
- MATERIAL
- STEEL
- OUTSIDE DIAMETER
- 1.656 INCHES NOMINAL
- INSIDE DIAMETER
- 1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM
- OVERALL THICKNESS
- 0.015 INCHES MINIMUM AND 0.017 INCHES MAXIMUM
- 5305-00-271-5168 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.375 INCHES NOMINAL
- HEAD DIAMETER
- 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
- HEAD HEIGHT
- 0.076 INCHES MINIMUM AND 0.089 INCHES MAXIMUM
- HEAD STYLE
- FILLISTER
- NOMINAL THREAD DIAMETER
- 0.138 INCHES
- 5305-00-271-6071 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.875 INCHES NOMINAL
- HEAD DIAMETER
- 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- NOMINAL THREAD DIAMETER
- 0.190 INCHES
- 5315-00-271-4539 PIN,STRAIGHT,HEADLESSMore Info ...
- FIRST END STYLE
- SQUARE
- MATERIAL DOCUMENT AND CLASSIFICATION
- SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
- MATERIAL
- STEEL COMP 1022 OVERALL
- SECOND END RELATIONSHIP WITH FIRST END
- IDENTICAL
- PIN OVERALL DIAMETER
- 0.1159 INCHES MINIMUM AND 0.1166 INCHES MAXIMUM
- 5305-00-271-5038 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.625 INCHES NOMINAL
- HEAD DIAMETER
- 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
- HEAD HOLE CONFIGURATION STYLE
- ROUND
- HEAD HEIGHT
- 0.087 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
- HEAD STYLE
- FILLISTER
- 5650-00-270-1487 ROOFING FELTMore Info ...
- COLOR
- BLACK
- CONTENT WITHIN EACH UNIT PACKAGE
- 108 SQ FT
- MATERIAL
- FIBER, ORGANIC
- IMPREGNATION MATERIAL
- ASPHALT
- LAPPING SURFACE WIDTH
- 2.000 INCHES NOMINAL
- 5905-00-270-5736 RESISTOR,FIXED,WIRE WOUND,INDUCTIVEMore Info ...
- ELECTRICAL RESISTANCE
- 75.000 OHMS
- AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER
- 40.0
- AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER
- 340.0
- BODY DIAMETER
- 0.312 INCHES NOMINAL
- BODY LENGTH
- 1.000 INCHES NOMINAL
- 5345-00-270-6884 STONE,COMMUTATOR SURFACINGMore Info ...
- ABRASIVE MATERIAL
- ALUMINUM OXIDE
- FLINT/EMERY SIMPLIFIED GRADE DESIGNATOR
- COARSE
- HANDLE LENGTH
- 10.000 INCHES NOMINAL
- NONDEFINITIVE SPEC/STD DATA
- K STYLE AND K1 CLASS
- OVERALL LENGTH
- 1.000 INCHES NOMINAL
- 1377-00-270-6961 CARTRIDGE,IMPULSEMore Info ...
- DOT IDENTIFICATION NUMBER
- UN0276
- DOT PROPER SHIPPING NAME
- CARTRIDGES, POWER DEVICE
- DOT REGISTRATION CODE
- EX1988010858
- DOD AMMUNITION CODE
- 1377-MC54
- BODY DIAMETER
- 0.811 INCHES NOMINAL
