NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 43788 results (0.08 seconds)
- 4810-01-475-4358 VALVE,FLOW CONTROLMore Info ...
- BODY MATERIAL
- STEEL
- END CONNECTION QUANTITY
- 4
- FLOW CONTROL DEVICE
- PISTON
- SPECIAL FEATURES
- 24 VOLT DC
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- PILOT VALVE ASSEMBLY
- 9150-21-879-8337 GREASE,BALL AND ROLLER BEARINGMore Info ...
- 4730-00-506-1610 FITTING,LUBRICATIONMore Info ...
- HEIGHT
- 0.812 INCHES NOMINAL
- MATERIAL
- STEEL OVERALL
- NOMINAL THREAD SIZE
- 0.125 INCHES
- PRESSURE RELIEF METHOD
- PORT SIDE
- SCREW THREAD SERIES DESIGNATOR
- PTF-SPL SHORT
- 5905-00-197-4818 RESISTOR,THERMALMore Info ...
- RESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT
- -15.0/+15.0 ALL RESISTANCE-TEMPERATURE POINTS
- ZERO POWER RESISTANCE AT SPECIFIED TEMP
- 14.1 OHMS 2ND RESISTANCE-TEMPERATURE POINT
- ZERO POWER RESISTANCE AT SPECIFIED TEMP
- 16.1 OHMS 1ST RESISTANCE-TEMPERATURE POINT
- TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER
- 20.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT
- TEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER
- 30.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT
- 4730-00-506-1609 FITTING,LUBRICATIONMore Info ...
- BYPASS RELIEF VALVE SETTING RANGE
- +4.0/+5.0 POUNDS PER SQUARE INCH
- HEIGHT
- 1.016 INCHES MINIMUM AND 1.047 INCHES MAXIMUM
- MATERIAL
- STEEL OVERALL
- NOMINAL THREAD SIZE
- 0.124 INCHES
- PRESSURE RELIEF METHOD
- PORT END
- 9150-00-045-1190 GREASE,WIRE ROPE-EXPOSED GEARMore Info ...
- BASIC INGREDIENT
- MINERAL OIL-SOAP
- QUANTITY WITHIN EACH UNIT PACKAGE
- 10.000 POUNDS
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- AS DIFFERENTIATED BY THE QTY.WITHIN EACH UNIT PKG
- PHYSICAL FORM
- ANY ACCEPTABLE
- 9150-00-057-8970 CUTTING FLUIDMore Info ...
- BASIC INGREDIENT
- PETROLEUM OIL
- FATTY MATERIAL TYPE
- ANY ACCEPTABLE
- MAXIMUM POUR POINT
- 40.0 DEG FAHRENHEIT
- QUANTITY WITHIN EACH UNIT PACKAGE
- 5.000 GALLONS
- SERVICE CHARACTERISTICS
- CORROSION RESISTIVE AND SALT WATER RESISTANT
- 9150-00-401-8731 LUBRICANTMore Info ...
- 9150-00-960-7254 GREASE,UNDERWATER BEARINGMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- 120 LB,UNIT QTY,DRUM
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- TEXT
- 9150-00-967-5860 CUTTING OILMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- 5 GAL,UNIT QTY,CAN
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- TEXT
