NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 12 results (0.05 seconds)
- 8460-12-150-9870 CASE,PILOT'S MAP AND DATAMore Info ...
- 5315-00-923-5399 PIN,GROOVED,HEADLESSMore Info ...
- EFFECTIVE LENGTH
- 0.688 INCHES NOMINAL
- DIAMETER
- 0.3759 INCHES MINIMUM AND 0.3761 INCHES MAXIMUM
- FIRST END STYLE
- CHAMFERED W/THRU HOLE
- FIRST END TAPER ANGLE
- 15.0 DEGREES NOMINAL
- FIRST END TAPER LENGTH
- 0.016 INCHES NOMINAL
- 2520-00-773-8022 BREATHERMore Info ...
- END ITEM IDENTIFICATION
- USED ON MODEL 7155 TRANSMISSION
- SPECIAL FEATURES
- WEAPON SYSTEM ESSENTIAL
- CRITICALITY CODE JUSTIFICATION
- FEAT
- 1410-01-131-3896 GUIDED MISSILE,INTERCEPT-AERIALMore Info ...
- HAZARDOUS MATERIAL CLASSIFICATION CODE
- X-C COAST GUARD CLASS AND 1.1 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION AND I DEPARTMENT OF TRANSPORTATION CLASS AND IV FIREFIGHTING GROUP AND E STORAGE COMPATIBILITY GROUP
- HEAD LOAD TYPE
- EXPLOSIVE
- HEAD TYPE
- ANTIAIRCRAFT
- MODEL NUMBER
- RIM-67A-5
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- W/UHF DTLM;W/WARHEAD MK 90 MODS
- 1410-01-131-3895 GUIDED MISSILE,INTERCEPT-AERIALMore Info ...
- HAZARDOUS MATERIAL CLASSIFICATION CODE
- X-C COAST GUARD CLASS AND 1.1 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION AND I DEPARTMENT OF TRANSPORTATION CLASS AND IV FIREFIGHTING GROUP AND E STORAGE COMPATIBILITY GROUP
- HEAD LOAD TYPE
- EXPLOSIVE
- HEAD TYPE
- ANTIAIRCRAFT
- MODEL NUMBER
- RIM-67A-5
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- W/O UHF DTLM;W/WH MK 90 MODS
- 1005-01-056-1162 SHIELD-CERAMICMore Info ...
- 5310-00-576-8226 WASHER,FLATMore Info ...
- CENTER HOLE SHAPE STYLE
- ROUND
- CROSS-SECTIONAL SHAPE STYLE
- RECTANGULAR
- HOLE DIAMETER
- 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
- MATERIAL DOCUMENT AND CLASSIFICATION
- MIL-R-7362 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
- MATERIAL
- RUBBER SYNTHETIC OVERALL
- 5998-01-013-6654 CIRCUIT CARD ASSEMBLYMore Info ...
- OVERALL HEIGHT
- 10.6 MILLIMETERS MAXIMUM
- OVERALL LENGTH
- 156.0 MILLIMETERS NOMINAL
- OVERALL WIDTH
- 126.8 MILLIMETERS NOMINAL
- SPECIAL FEATURES
- PRINTED WIRING BOARD 1,TERMINALS 22,CAPACITORS 7,DIODES 19,TEST JACKS 5,TRANSISTORS 12,RESISTORS 26,INSULATOR DISKS 13
- 6220-00-959-5696 PANEL,INDICATING,LIGHT TRANSMITTINGMore Info ...
- PANEL MATERIAL
- PLASTIC
- OVERALL WIDTH
- 2.562 INCHES NOMINAL
- OVERALL LENGTH
- 5.688 INCHES NOMINAL
- 3040-00-993-6100 SHAFT,STRAIGHTMore Info ...
- MATERIAL
- STEEL COMP 416
- MATERIAL DOCUMENT AND CLASSIFICATION
- AISI 416 ASSN STD SINGLE MATERIAL RESPONSE
- FIRST END STYLE
- CIRCULAR GROOVED
- FIRST END GROOVE WIDTH
- 0.0180 INCHES NOMINAL
- FIRST END GROOVE DIAMETER
- 0.1750 INCHES NOMINAL
